Crazytrain
09-26-2007, 03:31 AM
C&P
With all the different files, loaders and posts on this now, its easy to see alot of people are getting confused. And of coarse everyones receiver is at a different point/file loaded, so some are having an easier time getting this working.
Its actually not very hard, if ya follow some basic steps, this was done with 5 different receivers, all at different setups/files and all worked out perfect, 1st shot, so if ya follow these exactly, just to be safe, you should be fine. Maybe a step or two more than ya might night, but if ya follow it, you are fine.
Thanx to RB and others for all the help and info, all the files are in the 2500 files section and been linked to alot, so I aint gonna link them again. Just trying to make this a little easier to follow for some.
**( have not tried it on a clone personally, but from what I understand, it will work, follow the steps the exact same, and simply replace step 3 with an early pansat clone safe bin, and step 5 with one of the latest pansat clone safe bins )**
1/ use the Blacklis.t13.a loader for everything and left receiver on the whole time (MAKE SURE TO LET EVERY FILE FULLY LOAD AND RECEIVER TO REBOOT)
2/ load 2500 factory bin 222 (do not turn off receiver)
3/ load 273 file (do not turn off receiver)
4/ load b75 file (do not turn off receiver)
5/ load 293 file (do not turn off receiver)
6/ j27_205_1 file, then receiver will pause and do its thing, then come back with the b75 flashing display, NOW turn off at the back when the receiver is finished doing its thing,
7/ get jvvh_213_Td file ready in the loader, turn on the receiver at back, as soon as you see the first b in the display , start loader, let it load and fully reboot. then turn off the receiver, turn off at the back, hook back up to your setup, reset, rescan and enjoy,
some still having issues may need to do a factory reset after the new file is loaded, some dont, if you are still having issues after the new file is loaded, do a factory reset, reset rescan and enjoy
(((ONLY STEP 7 WILL NEED TO CHANGE WHEN NEW FIXES COME AVAILABLE, SIMPLY REPLACE THE 213
FILE WITH THE NEWEST ONE WHEN OUT )))
USE AT OWN RISK
The all in one package can be found now in the files section with all the files you need in one place
to make it easier for everyone at the link below
http://www.dssgeeks.com/forums/2500-2700-conversion-t14124/index.html?p=43882#post43882
With all the different files, loaders and posts on this now, its easy to see alot of people are getting confused. And of coarse everyones receiver is at a different point/file loaded, so some are having an easier time getting this working.
Its actually not very hard, if ya follow some basic steps, this was done with 5 different receivers, all at different setups/files and all worked out perfect, 1st shot, so if ya follow these exactly, just to be safe, you should be fine. Maybe a step or two more than ya might night, but if ya follow it, you are fine.
Thanx to RB and others for all the help and info, all the files are in the 2500 files section and been linked to alot, so I aint gonna link them again. Just trying to make this a little easier to follow for some.
**( have not tried it on a clone personally, but from what I understand, it will work, follow the steps the exact same, and simply replace step 3 with an early pansat clone safe bin, and step 5 with one of the latest pansat clone safe bins )**
1/ use the Blacklis.t13.a loader for everything and left receiver on the whole time (MAKE SURE TO LET EVERY FILE FULLY LOAD AND RECEIVER TO REBOOT)
2/ load 2500 factory bin 222 (do not turn off receiver)
3/ load 273 file (do not turn off receiver)
4/ load b75 file (do not turn off receiver)
5/ load 293 file (do not turn off receiver)
6/ j27_205_1 file, then receiver will pause and do its thing, then come back with the b75 flashing display, NOW turn off at the back when the receiver is finished doing its thing,
7/ get jvvh_213_Td file ready in the loader, turn on the receiver at back, as soon as you see the first b in the display , start loader, let it load and fully reboot. then turn off the receiver, turn off at the back, hook back up to your setup, reset, rescan and enjoy,
some still having issues may need to do a factory reset after the new file is loaded, some dont, if you are still having issues after the new file is loaded, do a factory reset, reset rescan and enjoy
(((ONLY STEP 7 WILL NEED TO CHANGE WHEN NEW FIXES COME AVAILABLE, SIMPLY REPLACE THE 213
FILE WITH THE NEWEST ONE WHEN OUT )))
USE AT OWN RISK
The all in one package can be found now in the files section with all the files you need in one place
to make it easier for everyone at the link below
http://www.dssgeeks.com/forums/2500-2700-conversion-t14124/index.html?p=43882#post43882