Ariza 700

[Tine]

I download the 331 for the 700 WinZip it and took it to the loader v2
It said that it is not the medal .name dose not correct.
I have try all the bins in that file
the load goes 800 and I set to 700
can any one help

[doug308]

once you unzip the file you must load factory first once loaded you can load new file,make sure the model on the loader says ASR 3530,dont touch until loaded and receiver reboots ,hope this helps.

[Tine]

Thank you I'll try it

[Tine]

I try and load v2 goes to 800 after i set for the 700

[Centauri]

If your receiver is ariza 700 than ONLY use that file made for ariza 700. NEVER use any file for your particular receiver.

Here is the Loader you need for all newer files:
http://www.dssgeeks.com/forums/ariza-fta-loader-t20992/index.html (http://www.dssgeeks.com/forums/ariza-fta-loader-t20992/index.html)

Make sure the file is UNZIPPED before adding it to the loader.
Make sure you use a null modem cable.

You most likely have a dash going across the receiver.
So do this:

1) Load in the FACTORY file. (Those dashes will continue but don't worry)
2) Load the 331 (New file). (Those dashes will still continue)
3) Go into MENU and INSTALLATION and set up your satellites antenna settings.
4) Scan for channels

[james789]

i loaded in the correct bin myself however it starts and stops now constantly shuts off then starts shuts off starts shuts off starts . any suggestions

[Ultra 500]

Mine did that at first the first time I tried to change sats, the constant rebooting? Turning it off with the switch in back stopped it and it's been preety normal ever since? Also remember that with the 4 files combined you have to pick the one needed,in your case look for aa-1(700). Chooseing that file should then come up as ASR 3450 on the loader automatically.