Ariza 800 converted ....wondering

[truckman]

Is there a way to change the lnb voltage on these, i thought way back there was, thinking i may have to go back to factory file for that, stb lost sig, hummmmmm

[just_angel]

how did you convert it?

[truckman]

how did you convert it?

tried 3 different ways, then went and put it back to an 800, guess what., still only get sig but no quality...guess i'll be checking resistors tonight.

PS..tried the March 09, and the newphase and the jtagless one also..

[truckman]

Well replaced the Tip42c resistor still no go, any idea folks........going to jtag back to ariza again .............see what happens

[Ultra 500]

Is the unit changeing skew values(-45/+45) from Hor. to Ver.? I've had that happen to me after flashing a new update recently on a couple of converted 700's. I'm beginnig to believe with so many different people putting out files for the converted receivers that some critical info is missing from some files? Files also seem to be different now. I'm fighting an intermittent signal problem of no Hor. Tr's. on 110. This just started about 3/4 months ago after installing a Pariza update with the NFLND background. Before that I had no problems whatsoever with these converted boxes that didn't need the LNB/jumper mod? When I have no Hor. for 110 on the Pariza, tried a different man. box and no signal problems!

[truckman]

Yah skew value are all over, but without a motor , would that matter.Going to work on it tonight. Anyone have"beunto" ?

[Ultra 500]

Yah skew value are all over, but without a motor , would that matter.Going to work on it tonight. Anyone have"beunto" ?

I had one that after updateing it had no signal. Found that the skew values were 0 and not changeing. Tried manually replaceing skew values to +45/-45 and still nothing. Then I thought well let's try a factory reset and then Power scan as some of the old "Dingo" updates had that problem?Tried factory reset and a regular rescan first and viola' changeing skew values and signal again so go figure. Maybe this is what may have gotten changed when different folks come up with the updates? p.s was wondering that since the Panariza is now a Pansat, does the skew value relate to LNB power 13/18v?

[truckman]

Still jumping thru hoops here. One power, next day nothing...Weird thing is though it scans in 91w fine.......even removed switch and ran direct.....oh well back to square 1.