slowroller
06-11-2007, 11:22 AM
--------------------------------------------------------------------------------
If you have trouble with autoroll on Coolsat 4000
NVRAM Cleaning Helps AutoRoll in CS4K
I'm running a CS5k with 135 and was having trouble with the autoroll not working. I had to hard boot, i.e. turn off the CS with the switch in the back, every time the keys changed.
I cleaned out my NVRAM and that problem has gone away, now autoroll works fine.
To clean out your NVRAM, hold the power button on the STB and press the up channel button. You will get a new menu that you may not have seen before. Navigate to the NVRAM with the arrow keys on your remote and when highlighted hit select. This will clean out the NVRAM.
when your done redo all your settings then autoscan u will be good to go
I have tried this and it works.
If you have trouble with autoroll on Coolsat 4000
NVRAM Cleaning Helps AutoRoll in CS4K
I'm running a CS5k with 135 and was having trouble with the autoroll not working. I had to hard boot, i.e. turn off the CS with the switch in the back, every time the keys changed.
I cleaned out my NVRAM and that problem has gone away, now autoroll works fine.
To clean out your NVRAM, hold the power button on the STB and press the up channel button. You will get a new menu that you may not have seen before. Navigate to the NVRAM with the arrow keys on your remote and when highlighted hit select. This will clean out the NVRAM.
when your done redo all your settings then autoscan u will be good to go
I have tried this and it works.