just_angel
05-10-2008, 12:22 PM
1. Download latest dongle file onto your captain receiver
2. Connect the internet cable to your dongle, and power up the dongle (power cable included)
3. Connect dongle to receiver with serial cable (cable included)
4. Turn on receiver and do factory reset
5. Set your switch numbers and scan channels
6. Go to Menu, System, Network settings, and Enable network. Green light on dongle must turn green in about 10-15 seconds
7. Exit all and wait for picture to come in
thanks goes to Fastlane
2. Connect the internet cable to your dongle, and power up the dongle (power cable included)
3. Connect dongle to receiver with serial cable (cable included)
4. Turn on receiver and do factory reset
5. Set your switch numbers and scan channels
6. Go to Menu, System, Network settings, and Enable network. Green light on dongle must turn green in about 10-15 seconds
7. Exit all and wait for picture to come in
thanks goes to Fastlane