Coolsat 4k-5k-6k--older bin 188 is working--2/17/09

[satguy2]

Coolsat models 4k-5k-6k working on older file 188--2/17

[ronjeremy]

Please someone out there confirm that Bin 188 work with CS 4000. I did try downloaded it but no luck. Thanks

[Centauri]

Yes it werks.
Try this:

Load that file.
POWER OFF from the back after
Hook it back to TV
POWER ON
Find a strong quality signal channel
Let it sit on that channel
Do NOT change
Let the autoroll work

Sometimes it just takes a while
Don't worry about that scrambled message display on the screen

[truckman]

Can confirm it works, friend has been using it for awhile now.

[ronjeremy]

Can confirm it works, friend has been using it for awhile now.

Thank bro. I did what the ways U advised,still no luck ! I check on it keys like this :f2 98 74 44 1c 65 77 d8
17 e3 e1 1d 89 4e 53 45
3d 73 19 22 27 5d c2 c9
97 96 5a 0c a5 79 27 f9

And it alltoroll position ?

[Centauri]

Then Load in the factory file
Then the 188 file

Still nothing?

Maybe a factory reset (Default) is needed
Write down all your antenna settings first cause this will delete everything you inputted.
After the factory reset,
Re-Input all antenna settings.
ie: LNB type, freq, sats etc
Scan for channels.

When all done, power OFF from the back for a few seconds
Crank her ON again
And again, keep it on a strong signal channel and see if it works.

By the way?
I hope this is DN we are trying to fix for you and NOT bev.
Bev has nothing working

[truckman]

I think you nailed it Cent, those arn't DN keys.

[Centauri]

hehe
I typed all that out then realized after the fact.
But I thought maybe I better just post all that typing I did anyways.

I am a 1 finger typer :rolleyes:

[dtx]

Morning, I am new to this site and wondering if this is where I come to ask a question?

[ronjeremy]

Morning, I am new to this site and wondering if this is where I come to ask a question?

Thanks Bros . Now I think may be I mess it up with the keys ? Because I had change it keys by manuals ! And now Im not sure which keys is the right one . Can someone please post the working keys of CS 4000 ! Thanks

[Al Bundy]

Morning, I am new to this site and wondering if this is where I come to ask a question?If you have a coolsat 4000,yes it is.

[Al Bundy]

Thanks Bros . Now I think may be I mess it up with the keys ? Because I had change it keys by manuals ! And now Im not sure which keys is the right one . Can someone please post the working keys of CS 4000 ! Thankshttp://www.dssgeeks.com/forums/DNDNDNDNDNDNDNwork-0101-keys-f271/index.html