coolsat 600 nd 110W settings keep losing of channels

[HUMBLE]

Blew it I didn't write dwn all the settings for my coolsat 600 110W can anyone help me out. Also when scanning it shws channels loading but when it saves channels half of them are missing and I get no radio stations, sat shows 96% grn bars, any advise.

[Centauri]

Tell us what kind of LnB's you have and if your using a switch, what port number are your sats plugged into from outside?
We will have to get all your setting back before you do anything else

[HUMBLE]

110.0W EchoStar port com 1, version 1.73, the settings I had written dwn are lnb:on, lnb pwr on, lnb ocs-dp, freq: 11.250, 22khz off, switch 1.0, not sure what othr settings I nd.

[truckman]

110.0W EchoStar port com 1, version 1.73, the settings I had written dwn are lnb:on, lnb pwr on, lnb ocs-dp, freq: 11.250, 22khz off, switch 1.0, not sure what othr settings I nd.


since you say you have a switch stated as 1.0, that would tell me you have a switch that the cables run into, if so then lnb would be standard. But if only 1 sat, 110, then you would have no switch. How many sats are you trying to pick up.

[HUMBLE]

since you say you have a switch stated as 1.0, that would tell me you have a switch that the cables run into, if so then lnb would be standard. But if only 1 sat, 110, then you would have no switch. How many sats are you trying to pick up.
Nimqic, EchoStar, AMC

[truckman]

Nimqic, EchoStar, AMC

3 different lnb's ?? cables all run into a disqc switch ??

If so try something like this, just change com ports for each sat.

Sateillte 110.0 W Echostar 6,8 DBS 1,2
Transponder 12224V 20000 Auto
LNB Power 13/18V
LNB Type Standard
22KHz off
Swithch Type DiSEqc
DiSEqc-- 1
Legacy sw off

[HUMBLE]

sounds like I should only be doin a scan on the 1 sat. 110.0w EchoStar, you can tell I'm difinetely a newbie.

[truckman]

You need to set up your sats correctly before doing any scanning. For proper scanning with the 6000 read this. And yes, scan only 1 at a time.

http://www.dssgeeks.com/forums/scanning-coolsat-t936/index.html

good luck.

[steve379x]

It took me a while to figure out where the radio channels were. On the right hand side of your remote there is a button that says TV/Radio. Hit it and all the radio channels will come up. Not sure why they just aren't on the guide.