snafu21
03-17-2007, 10:59 AM
To transfer either Firmware or Channel Data from one Coolsat Receiver to another.
1. Use a null modem cable and connect the two units. (Not the same as one used for flashing 4000 pro or 5000 platinum model)
2. On master STB..go to menu then to System Info.
3. Turn on and plug in the slave unit.
4. Choose either Firmware or Channel Data and enter OK.
5. Be sure to do Firmware first if you are going to do a complete copy of Firmware and Channel Data.
6. Wait until download in complete....shut off slave unit, shut off master unit and unplug null modem cable.
1. Use a null modem cable and connect the two units. (Not the same as one used for flashing 4000 pro or 5000 platinum model)
2. On master STB..go to menu then to System Info.
3. Turn on and plug in the slave unit.
4. Choose either Firmware or Channel Data and enter OK.
5. Be sure to do Firmware first if you are going to do a complete copy of Firmware and Channel Data.
6. Wait until download in complete....shut off slave unit, shut off master unit and unplug null modem cable.