Another CPU Fan mod

[labrasa]

:D Don't get "heated up" :) it was a good post all info is good info:cool:I install a 12volt fan inside the box so now the power supply is cool
also I put a heat sink on the cpu too on top is a 10 ohm resistor I take 14 volt from the power supply the resistor is betwin the fan an diode note this fan is chipset computer with 12 volts 0.15 milliamp ..............:D

[NOKIA™]

labrasa ...thx for the pics..

but...

to post a procedure... u have to include more tech details...

what i see above is not enough to even try to do...

so kindly edit ur post to include useful steps...

[labrasa]

ok maybe in spanish cos my english is bad

[barlow1970]

Its a little bit over my head labrasa . Long as it works do what ya do.

[NOKIA™]

ok maybe in spanish cos my english is bad

then maybe not...

we don't support other than English here

[labrasa]

ok take any 12v chipset or cpu fan an connected from the firft diode from lef to right thear is 14volt so i put 10 ohm/5 watts resistor bet.diode an fan..the ground conneted to the chassis an positive to resistor that all ........also if you want to use any computer or chipset heatsink for the cpu....it more better ......an keep your box cool for ever......

[The Dark Knight]

Moved your Thread here... In the future make sure ya start your own thread as to not
steal some one elses thunder...

No harm No foul... My friend