CS6000 froze with norw 177...help

[rolo]

:confused:,I loaded the 177 file and now my receiver is frozen and I can get it to do anything , change channels turn off bring up menu,,,nothing . I tried power off and still the same thing. Anyone have any suggestions for me. Thanks

[mazdaman]

What happens when you unhook your coax. See if it stops being froze. On the CS6000 I am waiting for a new bin also but I have read that you might have to load the factory bin first then the new bin. I know I had to do this to my other box which is a CW700,

Hope this helps.

[rolo]

Thanks , i tried that also but nothing. I have it unplugged right now so will try again later and see if that helps thanks Mazdaman

[FullMetalPanties]

i had same problem with my cs6000, found that if you unhook coax and use power switch on back, may have to do 3-4 times before it will reset. do not hook the coax back up, or within 2-3 minutes it will lock up again.i am gonna' try and reset then load factory settings and try again..will let you know what happens later.

[FullMetalPanties]

cs6000 is now un-frozen, but still no channels available. remove coax then turn box on and off with rear power switch then back on and you should be unlocked. go to menu and reset factory settings. all good.

[warwizzard73]

you will have to wait for a new bin to be released your best off factory flashing factory reset and leaving lnb line disconected till then

[FullMetalPanties]

where in the world is the new file for the cs6000??? THANK god i have a new cs7100 coming in the mail TODAY!! (i still want the 6000 file) please....

[warwizzard73]

no bin begging please as it is not allowed. noone on this site is a coder the files are brought to this site as a convienience for you so you dont have to go hunting for your files. when the files are released they will be posted as of yet no files have been released for 4 5 6k cs boxes.

[FullMetalPanties]

sorry, (i am a newb) didn't mean to come across as begging. my new 7100 did come today,got it all set up and i am very happy with it.

[rolo]

Thanks Mazdaman & FullMetalPanties It did the job and now I just wait like a good boy for new bin...and thanks everyone. :)

[ftarookie]

:coolup:Hello guys! new bin 178 for cs6000 is out and running:coolup:

[boomer6502]

Been away for a week, so I missed alot of this conversation. My machine froze also, and I just nturned it off on the back and then on again. Before it had a chance to fully boot up, I started pushing the channel up button on the machine. It prevented it from freezing when it was booted. May not need this info now, but if it happens again - you may want to try that. Looks like a new bin is available. Hope I get some use out of it before its gone. Cheers.

[skybliss]

I saw a new bin 178 is out already...
Any probs with that one?