cs8000

[dcripped24]

I can only get TPs with an R on them can someone explain this to me?

[tech07]

I can only get TPs with an R on them can someone explain this to me?

What Satellite are you pointing at?

Your LNB Type may be entered incorrectly.

Please post your Dish Settings for the sats you are trying to receive so we can have a look see.

[dcripped24]

Im aimed at 110/119 i have a dp dual

[tech07]

Im aimed at 110/119 i have a dp dual

Ok thanks.

Now go to Menu, Dish Settings, set up 119 and post the settings that you see on the screen. Do the same for 110.

I need the values for

LNB Type:
LNB Freq

Diseqc Port:

Something like this

For 119

file:///C:/DOCUME%7E1/User/LOCALS%7E1/Temp/moz-screenshot-9.jpgTransponder 12224V 20000 Auto
LNB Power 13V/18V
LNB Type: OCS-DP

Diseqec 1

for 110W

Diseqc 2

[dcripped24]

Dish 1 and 2
sat 110w Echostar 8,10
trans 12224v 20000 Auto
LNB Power 13/18
LNB type OCS-DP
22Hz off
switch type none
option none
legacy switch off


Every thing else is the same on 119, 119 is on dish 2and 3

[tech07]

Dish 1 and 2
sat 110w Echostar 8,10
trans 12224v 20000 Auto
LNB Power 13/18
LNB type OCS-DP
22Hz off
switch type none
option none
legacy switch off


Every thing else is the same on 119, 119 is on dish 2and 3

Ah there you are

OK for 110W set the Switch to Disecq

Diseqc port 2

for 119W it must be Diserqc 1

Give that a try.

[tech07]

Have a look thru this post.

(http://www.dssgeeks.com/forums/set-up-your-t824/index.html)
How to set up a CS 8000 (http://www.dssgeeks.com/forums/set-up-your-t824/index.html)

[dcripped24]

I did as the post said and now i have 99% on top and 0% on the bottom signal.On both sats

[tech07]

I did as the post said and now i have 99% on top and 0% on the bottom signal.On both sats

Sorry but I do not have my CS8000 set up...which signal is the top which is the bottom? S or Q?

Are you certain that you have DP LNBs

Assuming S is 99% then either you are not aimed at the Sat in question or you have the improper settings

[dcripped24]

I had a script to dn, there is a dp on the lnb which is two, in same housing.

[tech07]

I had a script to dn, there is a dp on the lnb which is two, in same housing.

OK DP LNBs then. Use OCS-DP in the setting.

Please set up 119 for Port 1 and 110 to port 2 and post your signals like this.

sat 119w Echostar 7
trans 12239v 20000 Auto
LNB Power 13/18
LNB type OCS-DP
22Hz off
switch type Diseqc
Diseqc 1
option none
legacy switch off

S:_______% Q:_______% Locked in Sat_______________


sat 110w Echostar 8,10
trans 12224v 20000 Auto
LNB Power 13/18
LNB type OCS-DP
22Hz off
switch type Diseqc
Diseqc 2
option none
legacy switch off


S:_______% Q:_______% Locked in Sat_______________

[dcripped24]

I dont have a 12239v transponder in the 119 list.

[tech07]

I dont have a 12239v transponder in the 119 list.

what about 12238V?

Just for testing purposed, set it for 119W and try various TP frequencies, we want to see if the Q increases above "0"

I need you to fill in the blanks on the last post, can't help you till you do, sorry.

[dcripped24]

I have done some SCANNING and got channels on both sats only by setting disq switch to 3 or which ever had signal but still can get channels with an H on them, I have even edited the tp and, there was no quality, which is on the bottom line. My settings are really the same as TECH had posted earlier,only difference is the disq switch settings.My cs does not lock the sat like vs.