SatFreak
01-14-2008, 08:44 AM
C&P
OK, got the Logitech Game Cubes today and works like a champ with my wireless Linksys Router, here is the full process for others to learn by ComputerGuru.
1st- Turned off NFusion receiver from the rear, then I turned off Linksys router
2nd- Then connected game cubes , one to the Linksys router and plug in the power supply and Ethernet Cat5 cable, then connected the other to the NFusion receiver and plugged the power supply and the Ethernet Cat5 cable
3rd- Then proceeded to power the Linksys router up, then powered the NFusion receiver, waited 2 minutes, then turned the power off fron the NFusion again then back on
4th- Then turned the Internet Connection On and Update On
5th- Then went to Main Menu/Network Information, verified that the IP addy, Gateway and the Subnet Mask were all in order and they were
6th- Then Main Menu/S/W Upgrade/Start Download and allowed it to update to the latest version, once done the system automatically rebooted
7th- Then went to Installation and reset all my Dish Settings, set Local Channels again, adjusted NFusion Volume, reset Favorites
8th- Then I put it on channel 140 and proceeded to watch ESPN, then tested Bev which I had not used in 3 days so I wanted to see how quick the channels would come in since there have been numerous key changes since,so I went to channel 1212 CTV and in 3 seconds Bev was up and running
OK, got the Logitech Game Cubes today and works like a champ with my wireless Linksys Router, here is the full process for others to learn by ComputerGuru.
1st- Turned off NFusion receiver from the rear, then I turned off Linksys router
2nd- Then connected game cubes , one to the Linksys router and plug in the power supply and Ethernet Cat5 cable, then connected the other to the NFusion receiver and plugged the power supply and the Ethernet Cat5 cable
3rd- Then proceeded to power the Linksys router up, then powered the NFusion receiver, waited 2 minutes, then turned the power off fron the NFusion again then back on
4th- Then turned the Internet Connection On and Update On
5th- Then went to Main Menu/Network Information, verified that the IP addy, Gateway and the Subnet Mask were all in order and they were
6th- Then Main Menu/S/W Upgrade/Start Download and allowed it to update to the latest version, once done the system automatically rebooted
7th- Then went to Installation and reset all my Dish Settings, set Local Channels again, adjusted NFusion Volume, reset Favorites
8th- Then I put it on channel 140 and proceeded to watch ESPN, then tested Bev which I had not used in 3 days so I wanted to see how quick the channels would come in since there have been numerous key changes since,so I went to channel 1212 CTV and in 3 seconds Bev was up and running