how to easily add Transponders.... blind scan anyone?

[ssh]

Hi Gurus,

I seem to loose many of the transponders after I have loaded the new bin and did a factory default....i've checked the TP list under 118.7 and 119, I don't see most of the TPs that were there before, but don't have anymore...

I can manually add TPs through the "installation" menu, but was wondering whether there is any easy way to load a list of TPs that are missing?

good old Viewsat used to do a "blind scan", don't seem to find that feature on nFusion. or, is it there somewhere?

thanks for your help,

~S.

[rosadorod]

Hi Gurus,

I seem to loose many of the transponders after I have loaded the new bin and did a factory default....i've checked the TP list under 118.7 and 119, I don't see most of the TPs that were there before, but don't have anymore...

I can manually add TPs through the "installation" menu, but was wondering whether there is any easy way to load a list of TPs that are missing?

good old Viewsat used to do a "blind scan", don't seem to find that feature on nFusion. or, is it there somewhere?

thanks for your help,

~S.

no blind scan but u can try this: option #1-go to menu/instalation/channel scan/OK,and verify tp's.if not present u can add tp's.option #2-make a factory default,load U43 as boot,then 130 as boot and 151 as main,set settings and rescan.

[ssh]

thanks...