Centauri
03-18-2007, 01:05 PM
Using Remote:
*Go to... MENU > ACCESSORIES > KEY MENU
*Hit the left arrow once to get to NAGRA 2.
*choose the key you want to edit (either DN or BEV) and hit the edit button shown on screen.
*Once in the main Key menu scroll left and down until you see this: 00_0901 for BEV or 00_0101 for DN. Scroll to the provider and Key string you wish to edit and select "edit key"
right arrow to the key string and use the remote number pad along with the arrows to select the letters (on left hand side of screen) to change values. When finished, use the arrows to select "OK" and hit "OK" on remote. Repeat this for all lines needing updates.
*To turn off auto roll do this on remote...
MENU > SYSTEM SETTINGS > OSD all the way at the bottom change AUTO ROLL to OFF.
*Go to... MENU > ACCESSORIES > KEY MENU
*Hit the left arrow once to get to NAGRA 2.
*choose the key you want to edit (either DN or BEV) and hit the edit button shown on screen.
*Once in the main Key menu scroll left and down until you see this: 00_0901 for BEV or 00_0101 for DN. Scroll to the provider and Key string you wish to edit and select "edit key"
right arrow to the key string and use the remote number pad along with the arrows to select the letters (on left hand side of screen) to change values. When finished, use the arrows to select "OK" and hit "OK" on remote. Repeat this for all lines needing updates.
*To turn off auto roll do this on remote...
MENU > SYSTEM SETTINGS > OSD all the way at the bottom change AUTO ROLL to OFF.