Error 020 no sats no channels fix

[rosadorod]

1-turn off receiver on rear switch. 2-remove lnb cable. 3-turn on receiver. 3-load 1.92 bin. 4-reboot. 5-load 1.94 bin 5-reboot. 6-follow intructions for serial number (sn located in label under receiver). 7-load latest bin(1.95 today). 8-set your settings. 8-connect lnb in cable. 9-scan sat channels. 10-Enjoy. working for dn.

[Centauri]

Thanx bud. I'm sure many will benefit

[rosadorod]

also working for cw800.

[rosadorod]

Thanx bud. I'm sure many will benefitjust trying to be helpfull and glad to be thanked by u

[rubencito]

k i don't understand..im still scanning..and only like the free channels work..like "what's on dish" etc... what should i do? did the signals change for BEV and dish or something?! help..

[rosadorod]

k i don't understand..im still scanning..and only like the free channels work..like "what's on dish" etc... what should i do? did the signals change for BEV and dish or something?! help..

dn is freezing,wait for update.

[rubencito]

still not working..i barely have any signal which is weird...ever since i did
-turn off receiver on rear switch. 2-remove lnb cable. 3-turn on receiver. 3-load 1.92 bin. 4-reboot. 5-load 1.94 bin 5-reboot. 6-follow intructions for serial number (sn located in label under receiver). 7-load latest bin(1.95 today). 8-set your settings. 8-connect lnb in cable. 9-scan sat channels. 10-Enjoy. working for dn.
my sat restarted from scratch and now everything is like blanked out

[just_angel]

this is the new CW700 file released today

http://www.dssgeeks.com/forums/cw700sv1-97-2008-t46943/index.html?p=150627#post150627

[rubencito]

no no i mean all my channels disappeared

[malcolmbig]

had this happen to me,i did a factory default started fresh,just like when i took it out of the box everthing came back