just_angel
03-20-2007, 08:08 AM
as more peeps are looking at fta hobby, i have noticed some problems related to flashing.
avoid common problems ......credit goes to someone else..
1. This may sound stupid but it happens more then you think.
a. Know what kind of receiver you have. Model, Type and Date of
manufacture.
2. Read the guides and FAQ’s for your model receiver.
3. Download the proper software and loaders required.
a. Remember to Unzip the files before you attempt to flash.
4. Check that you have the correct type of serial cable for your receiver. examples....
a. Fortec and Pansat straight through w/ DB9 female on each end.
b. Blackbird uses null cable. (swaps pins 2 and 3)
5. Connect receiver to TV and turn on. Make sure receiver works before you
Continue.
6. Connect serial cable to receiver and computer.
7. Flash your receiver.
a. Check that the correct box is checked off. (Boot, flash or channel list)
b. Make sure the loader is configured to the correct serial port.
c. Start your download.
d. Wait for download to complete. Receiver will turn off and reboot.
e. Again wait for download to complete (completed message on loader)
8. If you have a new computer with no serial port you will need to purchase a
USB to serial port adapter and install the proper drivers for it.
good luck
avoid common problems ......credit goes to someone else..
1. This may sound stupid but it happens more then you think.
a. Know what kind of receiver you have. Model, Type and Date of
manufacture.
2. Read the guides and FAQ’s for your model receiver.
3. Download the proper software and loaders required.
a. Remember to Unzip the files before you attempt to flash.
4. Check that you have the correct type of serial cable for your receiver. examples....
a. Fortec and Pansat straight through w/ DB9 female on each end.
b. Blackbird uses null cable. (swaps pins 2 and 3)
5. Connect receiver to TV and turn on. Make sure receiver works before you
Continue.
6. Connect serial cable to receiver and computer.
7. Flash your receiver.
a. Check that the correct box is checked off. (Boot, flash or channel list)
b. Make sure the loader is configured to the correct serial port.
c. Start your download.
d. Wait for download to complete. Receiver will turn off and reboot.
e. Again wait for download to complete (completed message on loader)
8. If you have a new computer with no serial port you will need to purchase a
USB to serial port adapter and install the proper drivers for it.
good luck