Ace Rimmer
07-06-2009, 10:13 PM
this is a C&P from another site, add to it or edit it if needed
-------------------------------------------------------------------
1. click "Start", "Connect to", "Show all connections", In the box that opens, Right click on your dial up account and select properties.
2. Click on the advanced tab at the top of the box that opens.
3. You should see "Internet connection sharing" and in that box will be "Allow other network users to connect through the computers internet connection". Select that box. I also turn off my firewall (located under the advanced tab also).
4. The bottom section of that box should have a connection labeled "Local Area Connection". Right click on it and select properties.
5. In the box that opens up, use the scroll bar and find the "Internet Protocol (TCP/IP).
6. Highlight it and click the "Properties" button.
7. In the box that opens select "use the following ip address".
IP address should be 192.168.0.101
Subnet mask should be 255.255.255.0
All other fields should be blank. Then select ok. (you are done with the pc)
On the "ip config" menu of your sonicview. Just mirror the following entries.
Setting type= static
Local ip =192.168.0.103
Local port=1920
Subnet=255.255.255.0
Gateway=192.168.0.101
Use DNS=Yes
Domain Name=www.svftaiks.com
DNS IP=192.168.0.101
Server Port=1920
Serial number=(your serial number sticker on your ihub)
Last select apply.
-------------------------------------------------------------------
1. click "Start", "Connect to", "Show all connections", In the box that opens, Right click on your dial up account and select properties.
2. Click on the advanced tab at the top of the box that opens.
3. You should see "Internet connection sharing" and in that box will be "Allow other network users to connect through the computers internet connection". Select that box. I also turn off my firewall (located under the advanced tab also).
4. The bottom section of that box should have a connection labeled "Local Area Connection". Right click on it and select properties.
5. In the box that opens up, use the scroll bar and find the "Internet Protocol (TCP/IP).
6. Highlight it and click the "Properties" button.
7. In the box that opens select "use the following ip address".
IP address should be 192.168.0.101
Subnet mask should be 255.255.255.0
All other fields should be blank. Then select ok. (you are done with the pc)
On the "ip config" menu of your sonicview. Just mirror the following entries.
Setting type= static
Local ip =192.168.0.103
Local port=1920
Subnet=255.255.255.0
Gateway=192.168.0.101
Use DNS=Yes
Domain Name=www.svftaiks.com
DNS IP=192.168.0.101
Server Port=1920
Serial number=(your serial number sticker on your ihub)
Last select apply.