stang0004
07-08-2009, 04:55 PM
8000hd -hey guys i'm gonna post my settings cause mine wasn't working and the instructions are not too clear and i setup wireless laptops with static ip's all the time, hope this helps. load latest 460 bin and power switchoff n on after its loaded and rebooted. then hit menu , ipconfig-
setting type - static
local ip - 192.168.1.214
local port - 80 or it won't work
subnet - 255.255.255.0
gateway - 192.168.1.1
use dns - yes
domain name - www.svftaiks.com
dns ip - 192.168.1.1
server port - 1920
serial number - the one on you ihub
apply - clik on apply or it won't work
this is ussing a linksys N router and a hard cable cat 5e
not sure of your settings on working pc go to start run type cmd, when black box opens type ipconfig/all and that should give your settings from the router, u still have to open port for the address u use and set 1920 for the port hope this helps some of you, mine wasn't working because i had local port set to 1920 and when i changed it to 80 the picture came in.:)
setting type - static
local ip - 192.168.1.214
local port - 80 or it won't work
subnet - 255.255.255.0
gateway - 192.168.1.1
use dns - yes
domain name - www.svftaiks.com
dns ip - 192.168.1.1
server port - 1920
serial number - the one on you ihub
apply - clik on apply or it won't work
this is ussing a linksys N router and a hard cable cat 5e
not sure of your settings on working pc go to start run type cmd, when black box opens type ipconfig/all and that should give your settings from the router, u still have to open port for the address u use and set 1920 for the port hope this helps some of you, mine wasn't working because i had local port set to 1920 and when i changed it to 80 the picture came in.:)