wireless
07-11-2009, 11:22 AM
Hi,
After loading v1.4 ihub base firmware I no longer can see ipconfig etc. in the menu system.
PS: I reloaded factory firmware 2.07 and back and still no ipconfig.
I need to downgrade back to either v1.0 or v1.2 base firmware.
Someone needs to upload it here. thks
vivera
07-11-2009, 11:33 AM
loade the v.1.4 with the WIZ1x0_105R then load v462 with nulcabel then reload v 1.4 with WIZ1X0_105R
jcghound
07-11-2009, 08:22 PM
Hi,
After loading v1.4 ihub base firmware I no longer can see ipconfig etc. in the menu system.
PS: I reloaded factory firmware 2.07 and back and still no ipconfig.
I need to downgrade back to either v1.0 or v1.2 base firmware.
Someone needs to upload it here. thksfor some reason your software flash is corrupted..try this as it has worked for me on a receiver that has a powerline adaptor net connection and for a neighbor that had a wireless connection that corrupted while attempting to update the software with the WIZnet loader...
hook the ihub while connected to the receiver, directly to the router with a cat5 cable. open the WIZnet loader, enable the DHCP. Enter the Server IP settings of 77.93.75.89 with port setting of 1920. Enable USE DNS. Do not use the Direct IP Search. Click on search and you should see your ihub appear on the board. If using more than 1 ihub, verify the correct ihub to be updated. Once you have your ihub, click on upload and browse in the 1.4 ihub software update file. When complete, power down the receiver and disconnect. Now you should have the ipconfig back in the menu and be able to load the new ihub bin updates with your usb flash stick. Working through switches, powerline adaptors and wireless connections do not appear to work well in restoring or updating the ihub software.
good luck