wd_1173
03-17-2007, 02:00 PM
C&P
How to Input Keys Manually for Orasat 3.0 by publicraven
ORASAT KEY ENTRY
Just read the instructions very carefully. The entire process is performed using just your Remote Control
ON YOUR REMOTE CONTROL PRESS 9999
A SCREEN APPEARS NAMED CODE EDIT
ON YOUR REMOTE CONTROL PRESS THE BLUE BUTTON (MARKED AS SLEEP)
PRESS THE DOWN BUTTON FOUR TIMES TO HIGHLIGHT LINE 5
PRESS THE OK BUTTON ON THE REMOTE CONTROL AND AN ON-SCREEN KEYBOARD WILL APPEAR
YOU WILL ENTER THE NEW CODE NUMBERS BY USING THE UP/DOWN AND LEFT/RIGHT BUTTONS. YOU WILL PRESS OK ON THE DESIRED NUMBER OR LETTER TO SELECT IT.
USING THE ON-SCREEN KEYBOARD AND YOUR REMOTE CONTROL ENTER:
10 XX XX XX XX XX XX XX XX THEN GO TO OK ON THE ON-SCREEN KEYBOARD AND PRESS OK ON THE REMOTE CONTROL
PRESS THE DOWN BUTTON JUST ONCE TO GO TO LINE 6
PRESS THE OK BUTTON ON THE REMOTE CONTROL AND AN ON-SCREEN KEYBOARD WILL APPEAR
YOU WILL ENTER THE NEW CODE NUMBERS BY USING THE UP/DOWN AND LEFT/RIGHT BUTTONS. YOU WILL PRESS OK ON THE DESIRED NUMBER OR LETTER TO SELECT IT.
USING THE ON-SCREEN KEYBOARD AND YOUR REMOTE CONTROL ENTER:
20 XX XX XX XX XX XX XX XX THEN GO TO OK ON THE ON-SCREEN KEYBOARD AND PRESS OK ON THE REMOTE CONTROL
PRESS EXIT ON YOUR REMOTE CONTROL
YOUR FINISHED. IF YOU FOLLOWED THE INSTRUCTIONS CORRECTLY EVERYTHING SHOULD BE BACK UP AND RUNNING.
I HOPE YOU ALL UNDERSTAND WHAT THE XX XX XX XX XX XX XX XX REPRESENTS.
10 = 00
20 = 01
How to Input Keys Manually for Orasat 3.0 by publicraven
ORASAT KEY ENTRY
Just read the instructions very carefully. The entire process is performed using just your Remote Control
ON YOUR REMOTE CONTROL PRESS 9999
A SCREEN APPEARS NAMED CODE EDIT
ON YOUR REMOTE CONTROL PRESS THE BLUE BUTTON (MARKED AS SLEEP)
PRESS THE DOWN BUTTON FOUR TIMES TO HIGHLIGHT LINE 5
PRESS THE OK BUTTON ON THE REMOTE CONTROL AND AN ON-SCREEN KEYBOARD WILL APPEAR
YOU WILL ENTER THE NEW CODE NUMBERS BY USING THE UP/DOWN AND LEFT/RIGHT BUTTONS. YOU WILL PRESS OK ON THE DESIRED NUMBER OR LETTER TO SELECT IT.
USING THE ON-SCREEN KEYBOARD AND YOUR REMOTE CONTROL ENTER:
10 XX XX XX XX XX XX XX XX THEN GO TO OK ON THE ON-SCREEN KEYBOARD AND PRESS OK ON THE REMOTE CONTROL
PRESS THE DOWN BUTTON JUST ONCE TO GO TO LINE 6
PRESS THE OK BUTTON ON THE REMOTE CONTROL AND AN ON-SCREEN KEYBOARD WILL APPEAR
YOU WILL ENTER THE NEW CODE NUMBERS BY USING THE UP/DOWN AND LEFT/RIGHT BUTTONS. YOU WILL PRESS OK ON THE DESIRED NUMBER OR LETTER TO SELECT IT.
USING THE ON-SCREEN KEYBOARD AND YOUR REMOTE CONTROL ENTER:
20 XX XX XX XX XX XX XX XX THEN GO TO OK ON THE ON-SCREEN KEYBOARD AND PRESS OK ON THE REMOTE CONTROL
PRESS EXIT ON YOUR REMOTE CONTROL
YOUR FINISHED. IF YOU FOLLOWED THE INSTRUCTIONS CORRECTLY EVERYTHING SHOULD BE BACK UP AND RUNNING.
I HOPE YOU ALL UNDERSTAND WHAT THE XX XX XX XX XX XX XX XX REPRESENTS.
10 = 00
20 = 01