international channel

[andy_2006]

hi i like to say this is very good forum and help full all the time. ok i have nfusion phoenix. my dish set on anik 3 118w with liner lnb. try to scanne international indian channel but get only few channels.my friend did send me ch_data 404.bin.i download form my pc to stb after i get all channel . but only star+ and star one is working if i try to play other chnnel. it say on tv no(or bad) signal check your antenna cable . if i change to star+ or star one they works right way.if i try swith on not working channels . right top on tv s and q signal half on red colour. so please help.

[jesseblue]

well the problem could be your setup (antenna and such)...

[andy_2006]

so how can i set up antenna then.where i can get antenna set up please help me.

[andy_2006]

i am not useing any diseq switch. cabel go to only lnb i have only one dish.signal strength is 85% all the time.

[NOKIA™]

118 is a circular LNB...


Satellite Anik F3 118

Lnb Power ON

Lnb Type STANDARD

Lnb Freq 10750

22 khz off

Tp Freq 11715

[andy_2006]

i did what u said nokia channel still not working can u please help. what is the factory file and lataste bin where i can get.please thanks lot

[Ledge]

Sounds like you don't have the correct lnb.....................

[andy_2006]

well it is same lnb and same size dish on my roof .it was works fine my viewsat box. it liner lnb and 33, dish i have.it was works fine those days.,

[NOKIA™]

u know where we keep the files... no?

latest file is 153 for Phoenix

u can also load it from SUNS server

factory default

load file

setup satellite again

fresh scan

[andy_2006]

hi nokia i have in antenna seting
LNB Type standard
LO Freq 11250
22KHz OFF
DISEqc 1.0 Disable
DISEqc 1.1 Disable
Multi-Dish Switch Disable
Lock Tp (4/13) 11789 H 20000
Moter Setting off
LNB Power on
Search Channels CH All Search
i think problem in lock Tp. i dont know how to change Tp.can u please help change Tp .
thanks lot

[NOKIA™]

change freq
hi nokia i have in antenna seting
LNB Type standard
LO Freq 10750
22KHz OFF
DISEqc 1.0 Disable
DISEqc 1.1 Disable
Multi-Dish Switch Disable
Lock Tp (4/13) 11789 H 20000
Moter Setting off
LNB Power on
Search Channels CH All Search
i think problem in lock Tp. i dont know how to change Tp.can u please help change Tp .
thanks lot

[Ledge]

well it is same lnb and same size dish on my roof .it was works fine my viewsat box. it liner lnb and 33, dish i have.it was works fine those days.,

Please forgive me for interupting, but Andy, were you able to scan ALL of the international channels from sat 118W on your Viewsat?

In other words, have you been able to scan ALL of the channels from 118W with the lnb you have now?

[andy_2006]

yes ledge i was scan all the channels from sat 118W on my viewsat .i dont know what happend i cant scan on my nfusion all the channels from sat 118W .even i set up my dish on roof i tight all the bolt before i start my new nfusion

[Ledge]

OK.....
Refer to Nokia's post #11.

[andy_2006]

yes finely i find out.the problem was cable connector .international channel working fine now. thanks nokia and ledge try to give me help thanks agan.