View Full Version : new ip address
Ace Rimmer
06-26-2009, 08:11 PM
here is the new Server IP
Go to ipconfig
then on DNS move to NO
then on the old ip change the last number to 89
7X.9X.7X.89
Ace Rimmer
06-26-2009, 10:06 PM
site: svftaiks.com
old IP: 77.93.75.115
new IP: 77.93.75.89
thecaveman
06-27-2009, 08:20 AM
are you talking about dns ip ?
thecaveman
06-27-2009, 09:11 AM
setting type - dhcp Change to static
local ip - 192.168.1.6
subnet - 255.255.255.0
gateway - 192.168.1.1
use dns - yes changed to no
domain name www.svftaiks.com
dns ip - 192.168.1.1 changed to 77.93.75.89
server port - 1920
serial number - that is in you hub
apply
user option- both
working now
mugabi7
06-27-2009, 11:18 AM
setting type - dhcp Change to static
local ip - 192.168.1.6
subnet - 255.255.255.0
gateway - 192.168.1.1
use dns - yes changed to no
domain name www.svftaiks.com
dns ip - 192.168.1.1 changed to 77.93.75.89
server port - 1920
serial number - that is in you hub
apply
user option- both
working now
i did exacty what you said. signal is fine. picking up bv 91. looking thru every channel, got nothing but no service. i'm usin vista. bridge connection is good. the one i don't get is how do i turn NIC off? i'm using a laptop/wifi.
i even tried hooking straight from router to ihub , but getting nothing.
Gugi47
06-27-2009, 11:48 AM
This is the Beta file. And YES you may loose service. Nothing what we can do.
thecaveman
06-27-2009, 12:41 PM
i did exacty what you said. signal is fine. picking up bv 91. looking thru every channel, got nothing but no service. i'm usin vista. bridge connection is good. the one i don't get is how do i turn NIC off? i'm using a laptop/wifi.
i even tried hooking straight from router to ihub , but getting nothing.
If you put the new bin do this first
If you are down, you may need to reset your providers router to pickup the IP change for the IHub .
Take the following steps:
o Make sure DNS is on YES
o Disconnect IHub from Sonicview receiver and the Internet (Cat 5 Cable etc.)
o Power off Sonicview
o Wait 5 Seconds
o Power on Sonicview
o Make sure you have picture on channel 100
o Plug the Cat 5 Cable in the IHub and put IHub on Sonicview
o Wait for IHub INI screen
o Then go to 200
This should allow the IP change to be updated
thecaveman
06-27-2009, 12:42 PM
lets star all over again
setting type dhcp or static freezing either way i have static for now the point get it working and then try to make it better later.
local ip 192.168.1.6
local port 80
subnet 255.255.255.0
gateway 192.168.1.1
use dns yes
domain
HTML Code:
www.svftaiks.com
dns ip 12.168.1.1
server port 1920
serial # your hub
apply
now if you say dns no
server ip 77.93.75.89
the problem with that one is signal are weak
but i like i say i have bad weather raining right now
thecaveman
06-27-2009, 01:26 PM
I gave exact inf... to others and they are working
mugabi7
06-27-2009, 02:07 PM
I gave exact inf... to others and they are working
only got history channel on 129 and couple locals on bv 82.
anyone getting more??
thecaveman
06-27-2009, 02:43 PM
only got history channel on 129 and couple locals on bv 82.
anyone getting more??
super channels, fight channel,history,nat geo, bio, 2622,2638,2300 and more
vBulletin® v3.7.1, Copyright ©2000-2010, Jelsoft Enterprises Ltd. |