new keys don't work

[maebelle]

I just loaded new dish keys and no picture, no nothin. Also did a default setting and rescan everything and no go. any suggestions ?

[Gordo]

nope cause the latest are posted right...is the AR off or on

[maebelle]

the AR is on.

[andyinottawa]

if your loading keys turn ar off

[fifties]

Did you convert your receiver to a virtual 2700 with the jvvh_205 bin, or to Puff, with the 253 yet? If not, convert it to Puff, boot 60, bins 253 and then 254. using the instructions by Blue Penguin.

[maebelle]

I already converted to PUFF and everything was working fine until this last key change. Any ideas ?

[maebelle]

Did a reset and scan and turned AR off. Loaded new keys, still nothin. did a key default and loaded new keys again and nothin. Did a scan of Bev and put in keys and all's good with BEV. HUH ?????

[maebelle]

this is confusing............. I just entered key 0 which I beleive was the old one and all stations came back...... when I enter key 1: EC3B44BB7F5C00CDD358F87F61157172 I get nothing. Why is this key listed as new ?

[Gordo]

because that is the last key that changed so it is new

next key change ya will see NEW at the end of key 0

I don't test fta so not sure what prob is...are ya saving them right?

[dishuser]

this is confusing............. I just entered key 0 which I beleive was the old one and all stations came back...... when I enter key 1: EC3B44BB7F5C00CDD358F87F61157172 I get nothing. Why is this key listed as new ?

why aren't you using both?
this way when key1 goes active you won't be back with another key problem

[fifties]

Bin 254 is working fine on both providers, and WITHOUT fooling with any keyz.

If you are having any problem, simply reflash 254, and make sure to set the default key in the CAS menu.