Knight Rider Light

[novo_blazers]

Please help! I had followed the How to Guides by loading the Boot60 then load bin 224 and then the latest bin still having Knight rider lights..comes on..I then try to do a Factory Reset and retried the same procedure..still having the same issues..any help would be appreciated..Thanks

[te2erd]

if that is the case you will need to jtag

[novo_blazers]

I got my pansat receiver to turn On..but once I load the latest bin file..b-75, the knight rider lights came back on..anyfeedback..??:confused:

[te2erd]

Have you thought about converting to the Puff files? I just posted the files you need to do this

[novo_blazers]

If it will help..I will try to convert my receiver to load the Puff files.:coolup:
Thanks..again..man

[rustbucket]

It will be the best if you change to the puff series,
The B-75 is for the people that has not change to the puff series. If you want to go back to the B-75 you have to put the boot60 file on and then the J27_205_1 Bin file and then wait until it says b-75 across the display. And then put the latest b-75 bin file on and rescand your channels. But I don't know why anyone would want to do this when the Puff is a whole lot better. Unless you are just testing and seeing if you can. :D

[Crazytrain]

Please help! I had followed the How to Guides by loading the Boot60 then load bin 224 and then the latest bin still having Knight rider lights..comes on..I then try to do a Factory Reset and retried the same procedure..still having the same issues..any help would be appreciated..Thanks

I'm at a loss as to which conversion you are talking about,
the b-75 conversion I posted doesnt use the Boot60,
See --->> HERE (http://www.dssgeeks.com/forums/2500-2700-made-t14090/index.html)

and neither conversion I posted uses the 224.

The boot 60 is from the Puff conversion, so think that is where you problem is
at. Look at the bottom of the Puff Conversion I'll give you the link for and you'll see exactly what I'm talkin about,
Puff -->> HERE (http://www.dssgeeks.com/forums/pansat-2500-converted-t32922/index.html)

By the sounds of what you've done, you have started the puff conversion, then used the wrong file after,
Do as rustbucket says, load the Boot60 again, then you'll be using the puff 253 bin and then the latest bin, its all explained in that Puff conversion , be
sure to follow it exactly, using the correct files, at the correct time, and turning the receiver off and on at the correct times, its important
Let us know how you made out