Help loading channels

[Dymes]

I'm new to FTA I have a CW700 I'm having trouble load the channel.When loading channels progress always starts at 34/65 therefore giving me only half the channels.What am I doing wrong ?

[garysam]

Do a factory default (channels only) and do it again.......should work.

[smack]

Can you give more info? What sat(s) are you trying for? Tell us your setup/settings, switch,lnb,etc.

[Dymes]

I'm Using legacy quad (sw44) freq 11250 trans 12282

[jace3500]

i just got the cw 700. i cant load but about 50 channels. i load these from echo7. on my neusat i had echo8,10 and can not locate this on cw? is there a channel list out there and how do i get at least most channels 4 dn?

[ferrocios]

Jace, I had the Neusat too. Look for echo 6,8 on the CW and load that. If it doesnt show a signal, just keep scrolling up and down until it does then scan that. You should also be able to load channels from Echo 1,2 and Nimiq 2 also. I got over 250 channels from echo 1,2.

[jace3500]

thanks ferrocios

[Labyrinth]

on the cw the sats are

17.echostar 7(119)
23.echostar 6,8(110)