Manual Key Entry

[Web Wizard]

originally posted by CMFINC

You're in luck- easiest manual key entry procedure.
(Once you've loaded your bin, go to any D/N channel, ie.300)

1) Press EXIT button twice
a Keys window will open "Current key info."
to the right of the word "Index", you'll find the active Key to be changed
so...Index: 0x00000001 means key01 is active
Index: 0x00000000 means key00 is active

2) Press yellow button.
Enter first half of key string. When you're done, go down to OK, and press. You'll be asked "Wish to save changed data?" YES (OK button)
Push Yellow button again. Enter the second half of key string. Go down to ok. Save changed data. Now you're back to Keys window.

3) Push exit button

Wait a bit. BINGO! A/V. It's easier than it sounds.

Repeat for Canadian provider, by going to any Nimiq CH. and repeat steps1-3

[Crazytrain]

First, push menu on your remote
user settings
autoroll options
turn off the providor you are going to edit

Then exit all the way out to tv screen again

now exit button on remote twice
this time choose
red button - key list
right arrow, and the top will change, go to Nagra 2
arrow down to the set of keys that are active and you
are going to change
Push the yellow button and edit the first half of the keys
ok to save
go down to the second half of that set
push the yellow button and edit the second half of the keys
ok to save
exit all the way out,
hope this helps