Benney
04-09-2007, 08:27 AM
After reading around here to day I thought this might help those that get confused with all the buttons for entering keys.
Hope this helps?
How to Manually enter keys on ARIZA 700 and ARIZA 750 Receivers.
STEPS:
1) Press “Menu” on remote
2) Go down to “Parental Control” & Click “OK” on remote.
3) Press “i 2004” on remote. This will bring you into the “CAS system” Menu.
4) Go down to “Nagravision 2” & select “ok” on remote.
5) Using the arrow keys on remote (volume up) scroll until you see “Provider ID”
01 01 is Dish Net and 09 01 is Bev.
6) Go down to “key number” & using the “Channel Down key”
Your “key number” should be “00”, press Volume Up and your key number will be 01.
7) Using your remote, channel down button, select “key Data” & enter the new
keys. For key 00. Then press “ok” on remote to store (the bottom
“ok/store” will flash)
8) Go back to “key number” on menu & press “volume up” once, on remote (it
will be 01). Make sure on your top left hand corner of the screen is still
“Nagravision2”
9) Using your remote, channel down button, select “key data” on the menu &
enter the new 01 key. Then select “ok” on the remote to store.
10) Press Exit once on your remote to go to the CAS system Menu.
Press channel down button till you get to Key EMU.
Press OK and you will see:
KEY CODE…………………………..ON or OFF
DISH NET AUTO ROLL…………….ON or OFF
BEV AUTO ROLL……………………ON or OFF
Set according to what is happening at the time with key changes.
11) Press “exit” four times on remote till you get to TV. You should see a picture.
NOTE: BUTTONS ON REMOTE FOR KEY ENTERY.
Audio = A
Signal = B
Red = C
Green = D
Yellow = E
Blue = F
BENNEY
Hope this helps?
How to Manually enter keys on ARIZA 700 and ARIZA 750 Receivers.
STEPS:
1) Press “Menu” on remote
2) Go down to “Parental Control” & Click “OK” on remote.
3) Press “i 2004” on remote. This will bring you into the “CAS system” Menu.
4) Go down to “Nagravision 2” & select “ok” on remote.
5) Using the arrow keys on remote (volume up) scroll until you see “Provider ID”
01 01 is Dish Net and 09 01 is Bev.
6) Go down to “key number” & using the “Channel Down key”
Your “key number” should be “00”, press Volume Up and your key number will be 01.
7) Using your remote, channel down button, select “key Data” & enter the new
keys. For key 00. Then press “ok” on remote to store (the bottom
“ok/store” will flash)
8) Go back to “key number” on menu & press “volume up” once, on remote (it
will be 01). Make sure on your top left hand corner of the screen is still
“Nagravision2”
9) Using your remote, channel down button, select “key data” on the menu &
enter the new 01 key. Then select “ok” on the remote to store.
10) Press Exit once on your remote to go to the CAS system Menu.
Press channel down button till you get to Key EMU.
Press OK and you will see:
KEY CODE…………………………..ON or OFF
DISH NET AUTO ROLL…………….ON or OFF
BEV AUTO ROLL……………………ON or OFF
Set according to what is happening at the time with key changes.
11) Press “exit” four times on remote till you get to TV. You should see a picture.
NOTE: BUTTONS ON REMOTE FOR KEY ENTERY.
Audio = A
Signal = B
Red = C
Green = D
Yellow = E
Blue = F
BENNEY