Mini will not read USB

[simpson9]

My mini will not read my USB stick. I know the files are there because I checked it with another mini. Has anyone run into this problem before?

[Belle Starr]

I've heard of one other doing that I think they turned it off at the back and turned it back on and it read it.

[simpson9]

I have done that many times and one time it read. I started to load the factory file and it froze on me. Shut it off and turned it back on and I have not been able to get it to read again.

[tech07]

I have done that many times and one time it read. I started to load the factory file and it froze on me. Shut it off and turned it back on and I have not been able to get it to read again.

I do not own a Conaxsat Mini....I wish I did. But alas, it was not to be.

Sounds like you may have you install the Factory bin with the Data Transfer Cable (serial Cable).

If it works then you can try the USB stick a gain, but I would delete it and load the latest bin on it.

Good luck

[simpson9]

Thanks, I will give it a try. I have never used the serial cable on a mini before. Do I have to download a program to do it?

[tech07]

Thanks, I will give it a try. I have never used the serial cable on a mini before. Do I have to download a program to do it?

Yes you do. Should be in the Files Section. I will have a look see for you.


Might be a good idea to read the How to do it. Look for stickies in the Discussions section.

[simpson9]

I will give that a try. Thanks for your advise.

[tech07]

I will give that a try. Thanks for your advise.

I think this is the loader file you need.

http://www.dssgeeks.com/forums/cnx-mini-recovery-t25421/index.html

Good luck