missing channels

[madmedic]

missing a bunch of channels, i was getting 600ish channels, then my daughter got hold of the remote and ended up doing a factory rest, i rescaned and sats and instaled the fix, but now i'm only getting 200 and non of the ppv, any help would be great.

[Al Bundy]

not really enuff info but...try the reset again,then set up 1 sat atta time and scan with network search on.Then save and set up other bird and scan it too.

In future,post the bin that you have loaded.I'm assumming it the Jan8th bin?

[satguy2]

missing a bunch of channels, i was getting 600ish channels, then my daughter got hold of the remote and ended up doing a factory rest, i rescaned and sats and instaled the fix, but now i'm only getting 200 and non of the ppv, any help would be great.

Give us some more info, Dish, switch, antenna settings your using etc?? I would also try doing an Individual TP scan, that works alot of the time but get back to us with the above info!! Satguy2

[madmedic]

yes it was the jan 9 bin, and here the info
2 egale star pro lnbf daul dss
egale star dish

setting

echostar 8 echostar 7
lnb - single single
lnbfq - 11250 11250
22 knz - off off
tp - 12224 12224
so - all all
ns - on on
diseqc - port 2 port 3
motor - dis enable
legancy - off off

i hope that the info you needed, i new at this but a fast learner

[truckman]

yes it was the jan 9 bin, and here the info
2 egale star pro lnbf daul dss
egale star dish

setting

echostar 8 echostar 7
lnb - single single
lnbfq - 11250 11250
22 knz - off off
tp - 12224 12224
so - all all
ns - on on
diseqc - port 2 port 3
motor - dis enable
legancy - off off

i hope that the info you needed, i new at this but a fast learner


Don't have your brand of stb, but under lnb do you have an option for standard, also as far as the ports go you will have to go look at your disqc switch to make sure where the cables are plugged in.
Usually set up is port 1 and 2.

[madmedic]

i check it and it port 2 and 3 port 1 is express vu

[truckman]

i check it and it port 2 and 3 port 1 is express vu

Don't know why i thanked you, free one we will call it. Anyways you say you want DN, but in your set up say echo 7 and 8,10 in ports 2 and 3. Then you say these ports are for express vue, that 's b*v .

[madmedic]

does it mader what order they go in?

[Al Bundy]

What matters is physical hookup.If port 1 on switch is going to 110,port 1 for 110 needs to show in set up etc...You want your channels?go out and look and make the corrections.