Mixed up Buzz Plus

[truckman]

Stb will take factory file but when loading V0313P it wont save to stb. I get SECU only on the menu. Tried over and over. Prevous file will save. Any idea's.

[friendlybear]

Try loading boot 2.04 again then the 313p

[Crazytrain]

Truck bro, I read this and thought it may help you,
or piss ya off LMFAO, depending on if the first works
here it is anyways.

"" means your rec. is locked...
type in your pin and this error
message should go away...good luck ""


"" It depends on what you did to get it to display SECU" I know when I did it it was to the buzz regular. It occured after I put the wrong file on the unit such as the 204 boot loader. Pin codes would not fix mine, I had to send it off to get it fixed. The tech. advised me the SECU means the unit went into a security lock down due to wrong application of hardware ""

(Thanx to problemchile & CHESTNUT )

[nyisles]

Stb will take factory file but when loading V0313P it wont save to stb. I get SECU only on the menu. Tried over and over. Prevous file will save. Any idea's.

Question for you truckman, which factory file are you using? I had to load the latest sv-1000 factory file. Hopefully this helps you!

[truckman]

So load the latest SV 1000 factory, then the latest Buzz Plus ?

[dman54]

I used factory bin and sv factory and reset tried pin # and nothing I can put old 312 and it takes but we know it dont work.Still get secu when i try to put the new file 313.I have two of them and both do the same thing I could see if one did it but not both of them? can someone help me please Thanks:confused:

[skankymama]

So load the latest SV 1000 factory, then the latest Buzz Plus ?
yes truck thats what i did had similar problem with the 313 and cleared it right up with the sv 1000 factory

[truckman]

Latest update, latest file actually loaded. Who know's but it's working.