PDA

View Full Version : i need help with 360 p a/v sitting

fatcat0993
09-16-2009, 10:17 PM
moved tv type now its rolling how do i stop it? thanks
Ace Rimmer
09-16-2009, 10:32 PM
move it back ?
fatcat0993
09-16-2009, 10:48 PM
move it back ?

just keeps rolling . f. reset dont work i dont know
Al Bundy
09-16-2009, 11:07 PM
Load Factory file and latest bin,whatever you were running.Your gonna lose settings anyways.Have to do set up again.
fatcat0993
09-16-2009, 11:33 PM
Load Factory file and latest bin,whatever you were running.Your gonna lose settings anyways.Have to do set up again.

did not work wont fac. reset.tried to change the a/v setting back no luck is there a phone no. for s/v. thank again
fatcat0993
09-17-2009, 10:18 AM
it started rolling tried to change it back still rolling tried fact, reset still rolling is there a phone number for tect at s/v thank you for all your hard.
fatcat0993
09-17-2009, 02:35 PM
put fact cleaner in still rolling i need help bad
truckman
09-17-2009, 03:22 PM
Ok i was reading some of your posts. Correct me if i'm wrong. SV with ihub, you either moved things to another room or hooked up to another TV and now all you see is a rolling TV screen. Right so far ?
Al Bundy
09-17-2009, 03:25 PM
Did you change the TV settings to get this roll?
fatcat0993
09-17-2009, 03:31 PM
no i went into the a/v setting and change it not meaning to it started rolling
truckman
09-17-2009, 03:35 PM
So were you able to change back to NTSC from Pal, which is probably causing this ?
truckman
09-17-2009, 03:40 PM
rEAD THIS AND FOLLOW THE INSTRUCTIONS, LET US KNOW......

http://www.dssgeeks.com/forums/fixing-screen-roll-t59589/index.html

Sorrry about the caps, to lazy to correct.
fatcat0993
09-17-2009, 03:40 PM
i goto menu go down 1 time over to right go down 1 hit ok go up one hit right or left and exit
truckman
09-17-2009, 03:52 PM
i goto menu go down 1 time over to right go down 1 hit ok go up one hit right or left and exit


Press MENU ( BUTTON ) then DOWN (ARROW) then RIGHT then DOWN, then OK, then UP.
This will get you to the place where you can change NTSC/PAL setting.

Then press either LEFT or RIGHT (just one). This is where you are scrolling through the different NTSC/PAL options.

depend on your setting, try right arrow first, if not start over and try left arrow button...
Ledge
09-17-2009, 06:36 PM
Fatcat,
There is no need for starting multiple threads for the same problem............................

Thanks