pacco
10-31-2008, 07:01 AM
I have a VS2000 plat. hooked to 2 dishes 1 4 DN ,1 4 bev.I have no problems with the DNDNDNDNDNDNDN,but the bev keeps cutting out. It's says it's searching for signal or auto rolling,it will come back right back on orsometimes it takes a couple of minutes. My signal strengh is75-90, my Quality sig. is 70 -100.I have tried another lnb ,same thing. I don't know what to do.Can someone help please?
pacco
10-31-2008, 08:29 AM
It's been like this for months. Other people I know don't have this problem.
Centauri
10-31-2008, 01:24 PM
Shut down your receiver from the back.
Move your BeV RG6 line to another switch port.
Power up your receiver again.
Make the diseqC port change in your instalation settings in MENU.
Now see if that helped.
Sometimes a port from a diseqC gets screwed up. If that did work than you may want to consider buying a new switch
pacco
10-31-2008, 02:13 PM
Thanks alot for your help ,Iwill give it a try.
3headlion
12-15-2008, 12:40 AM
I think you need a new switch. If you buy new switch try Cheeta I have had very good response.