snowbird13
05-29-2009, 01:38 PM
my wife extracted the new out post file for the sv360 pr and put it in the box and it will not come back on::
dishuser
05-29-2009, 02:07 PM
try loading factory bin with cable
snowbird13
05-29-2009, 02:10 PM
thanks but dont know how to do that
Gugi47
05-29-2009, 02:13 PM
Try this:
Turn the receiver off with the switch in back
plug the usb stick with the 175 file (the one that works)
hold the OK button on the front (silver one) and turn on the switch in back...the USB loader will open...
select the file you want to load and press OK
wait for it to load....when it finishes it should be a blue screen
remove the usb stick and reboot the receiver with the switch in back
if it does not read the usb stick, turn it off in back again...hold the button and turn the back switch back on..may take a couple of attempts...
then it should come back up as it was before.
Good luck.
snowbird13
05-29-2009, 02:26 PM
thank yall so much dssgeeks are the greatest it lives again