NewSV 360 setup

[DBIZ]

I just got a new Sv 360Elite. I was able to set up the Stellite connection just fine. However I was trying to load a new bin file and used the set up from one of the old Threads.

I formatted my usb drive with FAT32 and unzipped latest bin on it.
installed the usb in the front usb slot
pressed menu got into PVR
Scrolled to the File on the USB drive (so far so good)
pressed ok to load the file
chose S/W Update
It popped a message bar saying “Reading" the bar slowly completes (I waited 15 minutes) but the unit is locked up. Regardless of what I press it has no response.
I turned the unit off and back on and I was able to try the load again and it does the same thing.

Any helpful thoughts on this?

[Ledge]

Also, do NOT unzip the file to the usb drive. Unzip it to your desktop first.

[DBIZ]

Also, do NOT unzip the file to the usb drive. Unzip it to your desktop first.

It turned out to be the Sonicview usb drive that came as a feeebee. I used a diffrent usb and it has passed that point no problem. I am loading alll the files and no issue so far.
Thanks