just_angel
09-10-2008, 11:41 AM
-THIS IS ONLY FOR nfusion Nuvenio HD Only!
Nfusion HD (nf_hd_v1.3sR_01F) - matchstick
Nfusion group is pleased to release version (nf_hd_v1.3sR_01F) of Nfusion HD software with full S.U.N.S. phase 2 support
-install UHF Module before you start (follow pdf I posted)
-ALSO NOTE THE FAN IN UNIT DOES NOT RUN TILL 3RD PARTY SOFTWARE is installed. THE PLASTIC FILLER ON BACK IS FOR JUST THAT NOT ANYTHING MORE IF YOU INSTALL BOARD ITS NO LONGER NEEDED OR PUT ON ANYTHING.
-things to know before you load the software.
one from factory bin you will see a screen asking for language (pick English)
then scroll to 'storage' set to 'front' and 'usb' then you will see 'upgrade' software hit ok
you then should see your files from your memory stick (find the one that starts with nf_hd_v1.3sR_01.bin this is the main software bin after you confirm it is the file you want to load 'hit green' button on remote 'wait' till it completes 'when it does' it will prompt you hit ok to reboot (software is now loaded) after new bin is loaded you will see software load on front panel.
box setup (do factory reset to start guided setup)
-now you move to guided setup at this point in time you should see Language screen again follow the screens to setup your LNB's
NOTE: be sure to pick correct lnb the 'info' icon on the remote changes lnb type then you pick the satellite to scan with 'ok' button every screen has 'what' buttons do on them
once all satellites are scanned then goto 'menu' 'installation' 'network' then back out this connects DHCP
-also pvr (is set to front or back usb) records via 'red' button on remote stores file on your attached drive (we will continue to get rest of the functions completed in upcoming bins) we have a set plan for this (did not want to hold up bin) i am more than sure most will like this function this records in .ts format very common but do note your PC you use must support HD for his to play 1080x1920 (no format of drive is needed) and you can playback content on PC box supports full pvr functions
in this release is (version nf_hd_v1.3sR_01)
also factory bin (nf_HD_factory)
bin loader for PC (not needed) usb is fine
UHF board install instructions
ippvr HD (beta) v1.5HD
Nfusion HD (nf_hd_v1.3sR_01F) - matchstick
Nfusion group is pleased to release version (nf_hd_v1.3sR_01F) of Nfusion HD software with full S.U.N.S. phase 2 support
-install UHF Module before you start (follow pdf I posted)
-ALSO NOTE THE FAN IN UNIT DOES NOT RUN TILL 3RD PARTY SOFTWARE is installed. THE PLASTIC FILLER ON BACK IS FOR JUST THAT NOT ANYTHING MORE IF YOU INSTALL BOARD ITS NO LONGER NEEDED OR PUT ON ANYTHING.
-things to know before you load the software.
one from factory bin you will see a screen asking for language (pick English)
then scroll to 'storage' set to 'front' and 'usb' then you will see 'upgrade' software hit ok
you then should see your files from your memory stick (find the one that starts with nf_hd_v1.3sR_01.bin this is the main software bin after you confirm it is the file you want to load 'hit green' button on remote 'wait' till it completes 'when it does' it will prompt you hit ok to reboot (software is now loaded) after new bin is loaded you will see software load on front panel.
box setup (do factory reset to start guided setup)
-now you move to guided setup at this point in time you should see Language screen again follow the screens to setup your LNB's
NOTE: be sure to pick correct lnb the 'info' icon on the remote changes lnb type then you pick the satellite to scan with 'ok' button every screen has 'what' buttons do on them
once all satellites are scanned then goto 'menu' 'installation' 'network' then back out this connects DHCP
-also pvr (is set to front or back usb) records via 'red' button on remote stores file on your attached drive (we will continue to get rest of the functions completed in upcoming bins) we have a set plan for this (did not want to hold up bin) i am more than sure most will like this function this records in .ts format very common but do note your PC you use must support HD for his to play 1080x1920 (no format of drive is needed) and you can playback content on PC box supports full pvr functions
in this release is (version nf_hd_v1.3sR_01)
also factory bin (nf_HD_factory)
bin loader for PC (not needed) usb is fine
UHF board install instructions
ippvr HD (beta) v1.5HD