NTSC scrolling screen? need help please

[DEANFEB]

just bought this 600SP as recommend here.. did all ok on the setup.. but somehow i messed up , changed the Channel no. to NTSC ..i think.. and now i have this scrolling screen..any help would be great..thanks in advance...

[Labyrinth]

try a factory reset from the menu if you can,,, and redo your setting

[DEANFEB]

sorry i cant, the screen is scrolling fast , not readable...?

[Labyrinth]

k, then power up from back then place in standby mode then reload new bin and reconfigure,,, if that does not work then reload factory 1st then reboot then reload new bin....

[truckman]

Not familar with your remote, but some have a button on them for changing that set up without going into menu screen.Viewsat on lowe part of remote.

[smack]

Try this.(I had this saved from somewhere)

Here is the method to change it back when you can't read the rolling screen.
PAL to NTSC

1. Menu
2. Scroll down 3 times (System settings)
3. Ok
4. Ok (system)
5. Scroll down 5 times (TV System)
6. Right or left arrow until video is present.