Help Please with 600s Pre. !!!!!

[JJCOOLSAT]

Hey guys I just got two CW 600s pre. recievers from Worldwide Satellite, I laoded new file into them, then auto scaned them for Nimiq 91w but I am still getting scramble channel. I already have one 600s pre. that I bought b4 that is working great on file 1.80. Seems like some of the settings are a bit different in (Edit Transponder) is there anyway I can make them the same as my other one? Please guys any help will be appricated. JJ:coolup:

[smack]

Did you enabled the patch ? F1,0 0 0 ? Next,you could clone a good working unit to the others.
How to Clone CW600s Box to Box?
=========================
1) Connect the master and slave box with twist RS232 null modem cable

2) Start the master receiver and press "POWER" key to make it standby
“- - : - -“.
3) Start the slave receiver, in the master box the led will display 'H'
and blink it.
4) Input the password:
111 ---- Transfer S/W
222 ---- Transfer data
333 ---- Transfer data, then S/W
444 ---- Copy whole flash except Boot Loader.
5) After finishing inputting the password. Transfer will begin.
When it finish, the LED will Display "-End". Disconnect the cable,
start your receiver.
Note: By the different password, you can do what ever you want to do
for Box to Box

[JJCOOLSAT]

Thank u so much smack. I did forget to enable patch and other info. will be useful also. I need to go to work right now but I will let u know how I made out tomorrow. Thanks again JJ:cool:

[xtremely_fuct]

if u r having problems within ur menu example not showing u all the options under antenna settings .....etc did u remember to do a factory default before loading new bin i had somewhat of the same problem and it fixed it for me

[JJCOOLSAT]

Thanks guys for all the support!!:D This is a great place to be, couldn't have solved my problem without u fellow Geeks. JJ:cool: