Please Help Me Set-up Nfusion HD With DPP 1000.2

[razorburn]

Just got NFHD. Using Netgear 606 router and xe102 for internet to the box. What can I do from here?

[slowroller]

Read here : Link http://www.dssgeeks.com/forums/nfusion-nuvenio-hd-f306/index.html


Here is a better one... http://www.dssgeeks.com/forums/service-not-available-t45139/index.html

[razorburn]

Tryed everything in guide. My router is pass worded. can this be a problem?

Trying to get DN. Just can not get internet connection.VSU working on all sats. Dish 1000.2.




























could not get

[Publicraven]

You need access to router, or try a direct line to HD machine if you can

[razorburn]

How do I get access to router?

[Ledge]

Remember, you must have the XE102 plugged into a wall recepticle on each end, not extension cords.

[razorburn]

Have xe 102 to wall. Set up 1000.2 dish with vs. Getting signal on vs. Do not see signal strength with NFHD. Also should loopout be connected to anything?

[ballbreaker]

What is the name of your router ? Did you get a cd with your router ? The cd should tell you how to get into your router properties to assign an IP addy to your fusion .

[razorburn]

I am using netgear 614. Yes I have a disk thar says ippvr.

[Ledge]

Your internet connection has nothing to do with signal quality. Forget about loop out.
Post your settings.

[razorburn]

You have 2 different diseqc settings.

What should they be and how can I check to see if signal is coming through. VSU
shows around 78% signal/Quality 87%.

[Ledge]

If your quality on the same cable is 87 with the Ultra, then there's a signal coming through.
Post your settings from "Antenna Setup" exactly how they appear..........

[razorburn]

If your quality on the same cable is 87 with the Ultra, then there's a signal coming through.
Post your settings from "Antenna Setup" exactly how they appear..........

LNB-DPLNBF
Diseqc mode--Disable
Dsesc option--Disable
Legacy sw--Disable
Network Search--No
Search Option--All
TP list--17.12457V2000
Machine does an auto scan of all three sats. Blue bar on left shows a 29% reading sometimes. Right bar jump green 92 to 100%. This while scanning.

[Ledge]

Ok.
I don't have the same model, but try this.
SAT_______________119_________________110_________________129
Diseq mode_________1.0_________________1.0_________________1.0
Diseqc option _____Port 1_______________Port 2_______________Port3

LNB type should be "DPPlnb".
Network search should be "On"

Scan 1 sat at a time.

[razorburn]

Ok.
I don't have the same model, but try this.
SAT_______________119_________________110_________________129
Diseq mode_________1.0_________________1.0_________________1.0
Diseqc option _____Port 1_______________Port 2_______________Port3

LNB type should be "DPPlnb".
Network search should be "On"

Scan 1 sat at a time.

Did not work---had sw21&34 in diseqc mode. Do I have dish connect to right port--I am using sat in on back of box.

[Ledge]

Diseqc mode should be disabled then.
"SAT in" sounds right.

[razorburn]

[QUOTE=Ledge;158801]Diseqc mode should be disabled then.
"SAT in" so


did not work---d.mode in disable shuts d-option down---it will not let me change ports.

[razorburn]

Have an NFHD need setting for sighal from Dish1000.2. VsU scans using ocsdp on DN works fine from same cable on same dish.
Followed guides to set up, but no luck. HD box Has dpplnbf which is ocsdp I assume. Tryed to set up manuall and dpplnbf but auto shut off on disegc mode when LNB set to dpplnbf.. Using Dick only. Any help appreciated greatly--have been trying everything that I can read.

[bobbyl]

do you have a laptop with wireless plug it in to the 10é100 port ,address to the router might be 192.168.1.1 look under the router it might be there. go to menu network settings see what download is on keys or sw try keys see what happens

[razorburn]

do you have a laptop with wireless plug it in to the 10é100 port ,address to the router might be 192.168.1.1 look under the router it might be there. go to menu network settings see what download is on keys or sw try keys see what happens

New at this--I cannot find on my laptop---Thanks

[JEDR]

I have a very good signal and quality on my nova nfusion, on the VS and CW but poor on the HD Nfusion specially on 119. Same setting for all. Any suggestion?