please help

[hemgelbert]

can anybody advise on how to make my coolsat 6000 work?
I already put the 169 and it's not working. Please help me!!
Thanks:noclue:

[Ace Rimmer]

turn autoroll off , enter keys . you can also look here http://www.dssgeeks.com/forums/mar-5th-coolsat-t30188/index.html

[NoReality]

Yeah what he said . lol

[hemgelbert]

Can u explain me step by step.. I'm new at this. I'm a girl so it's kind of hard for me to make it to work. I will really appreciate if anybody could help. I've never asked for help.. Thanx a lot !!!

[Ace Rimmer]

since you are new to the game i would sugest reading the blue stickys ,they have lots of good info for yea and sorry we dont go easy on girls , well i'll give you a brake this time only

the keys you need are here
http://www.dssgeeks.com/forums/current-keys-f99/index.html

this here is a copy & paste so it will have all the info on keys and it's not as hard as it looks

Here's how to manually Load Keys for the Coolsats:
On your remote control,
Press 8282, this will bring up the Key Edit menu. The #1 box at the top should say Nagravision. If box #1 does not say Nagravision, you may need to scroll to box #72 using the right or left arrow buttons on your remote. The CAS should read Nagravision. The Ident should read Dish Network (0001), below that, there should be 4 boxes on the left that have 10, 11, 20, 21 in them with numbers and letters to the right of those numbers. This is where the current key data is located and may need to be changed manually from time to time. Autoroll files normally make these steps unnecessary but the occasional unforseen circumstances make changing the data necessary but easy to do.

UPDATED INSTRUCTIONS/INFO:
Press the down arrow button to highlight whichever is the Current Active Key(s) which will be either
10 & 11 = Key 00 Data (aka:86) ( 16 numbers/letters ) or 20 & 21 = Key 01 Data (aka:96) ( 16 numbers/letters ) or both as determined by the Key gathering program you are using such as CyberDBS, KeyMaster, Get Keys, Jeepers, Maestra etc., which can be found in the Tools and Utilities section under STB Channel Lists and Tools
From the Current Active Key Data Information (numbers and letters) you wrote down,
Press the corresponding numbers and letters using your remote
There are 2 different methods to input the numbers and letters:

1)To input the needed Numbers, press the corresponding number on your remote and it will automatically move to the next space for data input
To input the needed Letters, press the Info button on your remote and it will change the letters with each push of the Info button. When you have the correct letter or number inputted, press the right aarow button and it will move to the next space for data input.

2) To input the needed Numbers and Letters, press the OK button on your remote and it will bring up a small letter and number menu. Using the up/down, right/left arrow buttons on your remote, highlight the needed number or letter and press OK. This will input the needed number or letter and automatically move to the next space for data input.

Once you have all the Key Data (numbers and letters) inputted all the way across for the corresponding Key Number(s) (10/11 or 20/21), double check to make sure all the information is correct.
Press the EXIT button and a box will appear on your screen that says;
Settings Were Changed
Do You Want To Save?
Yes - No - Cancel
Highlight the YES button and press OK
That's it. In most cases, the screen should either have a picture on it right away or in some cases, it may be black ( with no message at all ) and take a few minutes for the active key to update to your receiver and then the picture will automatically pop on. Hope this helps. :)

[truckman]

Hope she's not blonde. JUST KIDDING. Ask away after reading and trying.

[hemgelbert]

I'm doing everything as u told me but on the ident box doesn't say DN. Now my question is does that matter? Please help me !! I really appreciate everything ur doing I know ur giving me a chance that I'm a girl and learning how to do all this process.
Thanxs again !!!

[skybliss]

I'm doing everything as u told me but on the ident box doesn't say DN. Now my question is does that matter? Please help me !! I really appreciate everything ur doing I know ur giving me a chance that I'm a girl and learning how to do all this process.
Thanxs again !!!
May I suggest that u try to reread again that part about nagrakeys?
No, it doesn't matter...

[hemgelbert]

Thanks for staying with me!! I already put all the keys that came out at 9:46 pm and nothing seems to be working. I would really appreciate if u can help me.. I know you've done a lot. But I would really appreciate if u can help me further.
Thanks again:)

[truckman]

Hey guy's correct me here. Some say turn Auto roll on, give it 5, working. Other say enter keys and turn AR off.

[skybliss]

Autoroll must be off, after that you shot down ur stb from back and after 30 seconds flip it back again and switch ar back. Then again shot down back switch for 30 seconds and back. Now u must have the tv.
Did u made sat scan?

[Centauri]

Hunny Hunny Hunny!!!!!
I really encourage you to hit that back button and look at what we call, The Blue Stickies.
They are filled with information and "How Too's" to help you get aquainted with your receiver.
We will try to help as long as you try as well by reading all we have provided for you.
It just takes time but you will become a coolsat pro in no time. :coolup:

[hemgelbert]

I just want to know if i'm doing everything correctly. I did the sat scan and I switch off the back button and I still don't have any pic. I'm very sorry to be a pain but I just want to get my receiver to work.
Thanxs!!

[Ace Rimmer]

Ok we need to start at the beginning
We know you have a CS6k ,now we need info from you .
#1 what provider are you after ? DN or B3V
#2 what lnb/dish do you have ?
#3 do you know computers ?
give us this info and we can give you the info you need

[NOKIA™]

try the following:

factory default...

load factory file http://www.dssgeeks.com/forums/coolsat-6000-factory-t412/index.html

load latest file http://www.dssgeeks.com/forums/coolsat6000-norw-169-t29980/index.html

setup antenna and scan fresh