Problems with new bin need help

[tenpin]

I have coolsat 6100 1 lnb sat 110.

downloaded new bin 149 took awhile to come on, when I change chanels it shows scrambled have to reboot from back but still shows each time i change chanels, this also happens when I turn my ty off at night and when I turn it back on shows scrambled. tried downloading with cable and flach dirve same thing any help would be appreciated

[Ace Rimmer]

try a tune up. do the reset /reload factory bin /new bin/set satellites/scan . also have you checked your cables from the lnb?

[tenpin]

Thankyou for your fast response I will try this when putting factory bin do we downloaded it the same way as a new bin file thanks in advance

[warwizzard73]

yes you get the factory bin from the files section for your box it will be in the stickies section above the new file

[mandy559]

do u know how to get rid of E

[aceinlacey]

do u know how to get rid of E

?????????????:noclue:

[nox2rlx]

I loaded new bin1.74 everything work great except some of the cartoon channels don't have any signal (no or bad signal) ... my signal of Level & Quality are up to 97%. Please help so my kids can watch them. Thanks a bunch!

[Ace Rimmer]

I loaded new bin1.74 everything work great except some of the cartoon channels don't have any signal (no or bad signal) ... my signal of Level & Quality are up to 97%. Please help so my kids can watch them. Thanks a bunch!

try scanning again

[nox2rlx]

Thank you Ace. I has been trying to scan it again but it happen the same thing. I live in Southeast region of Florida, do you think is there any thing going wrong with the Satellite 119 W or just the new bin1.74 doesn't support these cartoon channels. Thanks in advance.

[just_angel]

try a factory default

then Auto-Scan, with Network Search option turned OFF