How To Program you Remote

[ryan20021982]

Here is the How to program your remote;

Steps
1) Turn on your Device

2) Press the OK Key and then press the Device Key on a 2 second span at the same time.
LAMP LED will blink twice.

3) Press CH+ or CH- key until Device turns off one and one.
LAMP LED will blink.
Note; if the CH+ or CH- key is not pressed in the course of 10 seconds the function will be cancel and have to start over.

4) If your Device turns off while pressing the CH+ or CH-
Press the OK Key
LAMP LED will blink twice and your remote will be programmed.