puff & lzma bins ?

[ruttinbuck]

hey guys can't to find it in the threads so i will have to ask!
the converted 25-2700 pansat that has been changed from puff to lzma can you use the ordinary puff bins or does it have to say lzma only? I thought i read somewhere you can use puff bins for lzma but you couldn't use lzma bins if you only had puff on your box! any help app.

[bluegoose]

Thats a good question, did you find the answer?? I would also like to know...

[Crazytrain]

Best to stick with
b75 for that conversion
lzma for that conversion
puff for that conversion

They are converted with different compression methods, and different ""garbage" taken outa the files, in order to keep up with the demand
on the lmtd memory of the receiver.
Hope that helps a little

They are easy enough to convert back from, and to,
the conversions, lzma and puff but usually they are out
within a very very short time of eachother, so not sure a few
hours is worth the time or not for ya

this is what i'm going by, posted with the original lzma conversion
thread on it

"" As for the binfiles themselves...they will have to be CLEARLY marked 256_lzma(PUFF.).bin or something of the sort.
As always, if your not sure, DON'T do it !!! ""

[kamyana]

hi,
i have panstic 2500. i loaded bin file as usual but this time it did not work.
need help

[puertoriko]

best to change over to new puff 101.w/ B-75 i read somewhere they have implemented the lzma file with the jvvh files now!!!HOWEVER.... i could be wrong... i switch this morning my daughter got tired off waiting!! aswell i follwed instructions and got knight puffer mode........

[Crazytrain]

Converting over to the Puff files is actually very simple
and straight forward if you follow the steps exactly. See here
http://www.dssgeeks.com/forums/pansat-2500-converted-t32922/index.html?p=114209#post114209

You cant miss any steps or files, or it will not work,
if you follow them exactly, you will be fine and the new Puff 262
file is working great with no issues at all


Switching back and forth between lzma and puff isnt that hard
either, but again, got to make sure to follow the instructions
carefully,
http://www.dssgeeks.com/forums/cs-256t-puff-t32921/index.html?p=114207#post114207

Check out the links and see if/what you may have missed, and if any
of it helps you get it goin and let us know

[novo_blazers]

Hey Crazytrain where can I find (Jvvh_Fortec-Pansat_CanAm_(PUFF)_253_(640K) bin)??? so that I can follow your Puff file conversion..
thanks..