I put the 201e

[starlooker55]

I put the 291e on my pansat 2500 and now I have no quality at all my sig is down to 67 it was at 87 and quality was 99 do any one know what the problem could be thanz in advance

starlooker55

[te2erd]

the fix wouldn't have anything to do with that check your dish

[donhicks1]

same problem no signal

[shalankajoe]

same problem no signal

your not the only one. Went to another file

[shalankajoe]

your not the only one. Went to another file

hooked up coolsat 5000 to same dish set up no problem works fine. I only pulled 110 with that file on pansat

[rustbucket]

There is something wrong with that file. I got no signal also until I reset the receiver twice and rescan the channels and then some channels would not come in. My 2700A is working ok, with the same hook up as the 2500A. And it is not just my 2500A , I have other people tell me of the same problem.

[tronics]

Not that I am trying to promote my bin or anything but if you want you can give it a try. I only run my bins for obvious reasons but many many people have found my bin to work far better than the others. I am not trying to knock anybody, as all of us who mod bins for these boxes do so for free and release them for people to use and we all work hard to produce these. So I hope this is interpreted correctly, I am not knocking jvvh or anyone but give my bin a try I think at least right now it is the most stable solution for the current femu bin.

This new femu bin is very different from the past bins and it required new mods to make it work in the 2500/FLU etc boxes. I cam up with my mods, some people just applied the old mods(hence the rolling puff issue) and jvvh is trying to come up with his own way to mod the bins for these boxes. My solution seems to work fairly well right now but it is not perfect yet, but none of the bins are. Even the legit 2700 users running un-modified femu bins are having problems.

BTW there are issues with using channel master so I suggest you rescan you sats if you lose your channel list and not use channel master.

Regards,
Tronics

[Gugi47]

Ukr_Jvvh-Team-PUFF_V201.zip
Tronics PUFF FEMU bin (Rolling PUFF fix)

Any of this two files will work for you.Give them a try. Good luck and enjoy it.

[gunn55]

Dont know what my problem is i load the bin and still get nothing.
My friend has same problem and we have the same box, any help would be great.
Thanks

[wireless]

Ummm... try the latest file. v201g.

[fedexmeupscotty]

Soon the alphabet will be used up.

[gunn55]

I used the 201g and still no good,but in system info it say's 201f but anyway is there something i am missing that i have to do like turn on auto roll or set default key like days of old.
Have been out since Saturday 5pm
Thanks for the help.

[myrtle pt. mike]

This worked for me....I scaned the 201F then did a factory reset. then
set up the satellites I wanted then rescanned the satellites that I chose ...
set the locals...set the time up. and exited out.
It worked for me. good luck
MPM

[novice]

Loading 201 PUFF - A Complete Guide
Loading 201 PUFF - A Complete Guide

1) Issue: Rolling PUFF - In redneck terms.. this means PUFF just keeps scrolling across the screen.. over and over again. RESOLUTION: Fire up your loader, and reload the EMU PUFF file of your desire. DO NOT DO anything to the receiver, and just click WRITE BIN. Now.. PAY ATTENTION -- If your sat receiver is NOT connected to your TV , then wait for the bin to complete writing. This means, when you see a pop up that says WRITE COMPLETE, and your computer goes "BONG", then reach behind your receiver and hit the power switch to OFF. Now take the receiver to your TV and connect it up the way you would if you really wanted to watch some porn. Once connected, turn your receiver on. The rolling PUFF should not happen, and the box should go to ON. If you turn the box back off again, guess what... its going to ROLL PUFF again. Get the idea yet ?

Now.. this part is not for those that had to reconnect everything, but in fact have their laptop connected to their receiver while their receiver is connected to their TV and STB. Its easy... just load the bin as you would any other bin. NO NEED to shut off the box at all.. just load it and leave the box alone. Again, once the write is complete, you CAN NOT hit the power switch in the back of the box. It will start rolling again.

Now.. to answer the question about turning off the box using the remote. YES.. you can do this and all is well.

2) Issue: NO SIGNAL AFTER LOADING THE PUFF EMU - Ok. The UKR bin (without SW21) will give you a NO SIGNAL issue. The RESOLUTION: load Fwank's file or load the UKR bin for SW21. Seems to work, do not know why with the UKR, maybe file name issue is incorrect or what not.. no clue, but it works. I personally used the tronics PUFF 201.

3) Issue: After LOAD, CHANNELS DO NOT DISPLAY or DOES NOT A/R - Redneck form again... You loaded the bin file, but when the channel try to come up, all you see is the channel info, that keeps coming in and out. You do not get scrambled channel, or anything. Just the channel information. RESOLUTION: Also tested on my end: Do a factory reset using your remote, reload the bin file again using ISSUE #1 as your guide, reset sat settings, conduct a blind scan, and all should be working again.

Everyone has just been skipping over a few steps that should be done EVERY time you load a new bin. Fwank has said it time and time again, he does a factory reset EVERY time he tests a new bin. No shortcuts on this one."

Works great. Almost as good as previous PUFF Bins. You gotta remember this is a new kind of Bin with a new conversion process.
__________________

[gunn55]

Novice, Thank's it works great !