No Quality???

[devildog06]

I am getting no quality reading only on transponders that have a horizontal polarization? On all even transponders (or vertical pol) I get great signal and quality. any ideas what might be causing this? i hooked up a different brand receiver and it got signal and quality on all transponders in use, so i know its not a dish alignment thing. would appreciate any insight on this problem. Thanks ... just wanted to add..i am getting 95 signal on all transponders..just 0 quality on the odd numbered or ones with the H next to them.

[fatcat0993]

I am getting no quality reading only on transponders that have a horizontal polarization? On all even transponders (or vertical pol) I get great signal and quality. any ideas what might be causing this? i hooked up a different brand receiver and it got signal and quality on all transponders in use, so i know its not a dish alignment thing. would appreciate any insight on this problem. Thanks ... just wanted to add..i am getting 95 signal on all transponders..just 0 quality on the odd numbered or ones with the H next to them.

i have a S/V360 with ihub. been having pro. with router got a new one set up but no tv are thay down right know? thank you.

[Ace Rimmer]

I am getting no quality reading only on transponders that have a horizontal polarization? On all even transponders (or vertical pol) I get great signal and quality. any ideas what might be causing this? i hooked up a different brand receiver and it got signal and quality on all transponders in use, so i know its not a dish alignment thing. would appreciate any insight on this problem. Thanks ... just wanted to add..i am getting 95 signal on all transponders..just 0 quality on the odd numbered or ones with the H next to them.

post your dish settings . all of them please

[Ace Rimmer]

i have a S/V360 with ihub. been having pro. with router got a new one set up but no tv are thay down right know? thank you.
did you read this ?

http://www.dssgeeks.com/forums/new-ip-address-t60671/index.html

[fatcat0993]

post your dish settings . all of them pleaseechostar 7 LBM type standard LBM fraq 11250 22KHZ offLBM power ON TRANSP 12224 SHARCH OP all NET S on DISEqC port 2 motor disabled Lagact switch off ECHOSTAR 8xLBN type standard LBN freq.11250 22KHZ off LBN POWER on TRANS 12224 SEARCH OPT all DISEqC port 1 MOTOR disable LAGACY SWITCH off

[Ace Rimmer]

echostar 7 LBM type standard LBM fraq 11250 22KHZ offLBM power ON TRANSP 12224 SHARCH OP all NET S on DISEqC port 2 motor disabled Lagact switch off ECHOSTAR 8xLBN type standard LBN freq.11250 22KHZ off LBN POWER on TRANS 12224 SEARCH OPT all DISEqC port 1 MOTOR disable LAGACY SWITCH off

use these settings

Lnb power=on
Lnb type=OCS-DP
Lnb frequency=11250
Transponder...110=12224, 119=12239
22khz=off
Search option=All
Network search=On
Diseqc...110=2, 119=1
Motor=Disable
Legacy switch=Off

[fatcat0993]

use these settings

Lnb power=on
Lnb type=OCS-DP
Lnb frequency=11250
Transponder...110=12224, 119=12239
22khz=off
Search option=All
Network search=On
Diseqc...110=2, 119=1
Motor=Disable
Legacy switch=Off

trie new ip then your settings still on tv

[Ace Rimmer]

i'm sorry but i dont understand what your saying

[fatcat0993]

i'm sorry but i dont understand what your saying

my setup worked yesday not to day is it down if ineed more work i tried the new ip address in my setup didnt work so i went back to old settings that work yesday

[Ace Rimmer]

ok try this. flip the switch on the back of the unit. thats a hard reboot, most of the time it helps . also are you sure about your ip connection?