PDA

View Full Version : How to revive SV360 Premier after loading incorrect Telefonica or Other File


xxkatxx
06-03-2009, 08:04 AM
How to revive SV360 Premier after loading incorrect Telefonica or Other File

You need to use the RS232 cable and the loader program to load factory bin, load system clean and then load latest non-telefonica file. sometimes force loading doesn't work because the USB is rendered inert. but it seems some folks managed to force load. If the USB dosn't work you will have to load via serial cable.

Sonicview SV-360 Premier - Factory Bin V0105

System Clean Premier

Latest Charlie Fix


USB Force Loading Procedure
c/p from post by Greeny

1] Place File on your USB stick
2] Place USB stick in Front or Back of the Receiver
3] Power receiver ON while holding the OK Button on the Front Panel
4] Now use front Panel controls and Select the file to load
5] Press OK button to load

Note: If you are using component cables, you will not be able to view the USB boot menu. Downgrade temporarily to S-video or RCA (Red, white, Yellow) cable.


How to Load via serial cable

Sonicview SV360 Premier Loader v1.1
(For use with serial cable only)

contributed in part by makmik