SAT Settings

[SAT2007GEEK]

Does this look correct for the following setup.

Tuner ID: Tuner1 & Tuner2
SAT: Nimiq 1, 3
Connection: Separate
LNB Type: Single
LNB Freq: 11250
22 KHZ: OFF
LNB Power: ON
TP: 12224
Search Options: ALL
Network Search: ON
Diseqc: OFF
Motor: Disable
Legacy Switch: OFF

Dish: Bell ExpressVu 18” or 20” Oval
LNB: Bell ExpressVu Dual LNBF 2 cables into the house
Multiswitch: EMP 3 x 4

Also Testing
CW 600S Premium

[truckman]

I don't use this stb, but just wondering if your only running 1 sat, dual lnb, so 1 cable into each port should run direct to each stb,,,,,why the switch ??Not needed.

[SAT2007GEEK]

Yes it is 1 sat with a dual LNB, two cables connected to each port & running back into the house to a multiswitch EMP 3X4. Reason for the switch is for the second std CW600S Premium. I have two cable running to the SV-360 which is a dual tuner std for the PVR function to watch a live show & record 1 or record 2 live shows & watch a recorded show.

[Gugi47]

You may have to turn the DISEqC to 1 and 2 for the SV 360 and 3 for the CW600 but you have to connect your cables to that ports.

[SAT2007GEEK]

Thanks Gugi47,
the multi is also considered a DISEqC in the SAT setting of the STB?

[SAT2007GEEK]

I am only test 91.0W Nimiq 1,3. So do I need to set the DISEqC?