Centauri
03-18-2007, 12:06 PM
This is from article 2.3 in the manual...
The selected TP is scanned in this menu option.
1- Select TP scan in the installation Menu
2- Select a satellite
3- Select a TP to scan by using the up down keys (using < > keys you can multiscan), then press OK to scan.
Advanced TP scan
Advanced Scan is used to scan the new TP of which the parameters have been entered manually. After setting the seach parameters like down frequency, Symbol rate and polarity by using the numeric keys and VOL < > keys, press OK
Setting the Video PID Audio PID /PCR PID
-You can press ok on the PID to search program
For in depth detail read page 26 of the Manual that came with the receiver 2700 model.
Please add to this thread if you need to clarify anything not covered. No questions here please.
The selected TP is scanned in this menu option.
1- Select TP scan in the installation Menu
2- Select a satellite
3- Select a TP to scan by using the up down keys (using < > keys you can multiscan), then press OK to scan.
Advanced TP scan
Advanced Scan is used to scan the new TP of which the parameters have been entered manually. After setting the seach parameters like down frequency, Symbol rate and polarity by using the numeric keys and VOL < > keys, press OK
Setting the Video PID Audio PID /PCR PID
-You can press ok on the PID to search program
For in depth detail read page 26 of the Manual that came with the receiver 2700 model.
Please add to this thread if you need to clarify anything not covered. No questions here please.