No Signal??

[lovethebuzz]

:noclue: Hello my fellow peeps. Having a problem with my SV1000 it is giving me a No Signal and my quality goes away and I have to reboot frequently? Has anyone encountered this problem. If so can someone help me out or point me in the right direction. Thanks

[lovethebuzz]

I will try that out. My signal is all good though. It just does it all of a sudden like while I'm watching tv. Sometimes the picture will freeze and the audio continues but picture stays frozen then No Signal appears. But Thanks I'll do what you said to do.

[Ledge]

Are you using a switch? If so, what kind.

[Ace Rimmer]

If your signal is dropping off all of a sudden check
1 switch as ledge said
2 check all your cables and cable ends . if a cable has a crack in it then replace it and clean the ends and use some dialectic grease on then .that will keep water out and the ends nice and clean
3 is the lnb somewhere that it gets hot? You may have to move it . I’ve had them get hot from sitting next to a tin roof

if all else fails do a reset as al said