ryan20021982
03-19-2007, 03:13 PM
Simple "NO" 8282 Key Entry
Easy Way To Input Keys Without The Remote...No need to enter 8282!
1) Connect receiver to computer
2) Open Cyber key grabber tool and retrieve the current working keys
You need only do steps 3-5 one time! Use the same downloaded file each time.
3) Open the Coolsat Loader and click on the "Keys" tab
4) Click on "ToComputer"
5) Click on "Browse" and specify the location you want to store
the "keys file" you download from receiver
6) Click on "Auto Detect" ...You will see the version of bin on the
receiver
7) Click "Exit"
8) Click "Connect" then "Start" (keys should download from
receiver in about 5 seconds)
9) Click "Finish"
10) Right click your mouse on the keys file you down loaded from your
receiver and click on "Edit" in the popup.
A notepad will open showing the keys in your recei
ver
Copy Keys from Cyber tool
11) For BEV...high light and copy the first eight key pairs from
"IDEA AUX 0" and paste them over the existing keys
at "10" under "Slot 2" in the keys file you got from receiver
12) Do the same for the second eight key pairs from "IDEA AUX 0"
but paste them over the existing keys at "11"
13) Use same procedures in steps 11) and 12) for "IDEA AUX 1"
but replace the keys at "20" and "21" in the keys file you
downloaded from receiver
14) Save keys file
Loading Keys to Computer
15) On CoolSat loader click on "ToReceiver" ... "Auto Detect" ...
"Exit"
16) Click "Connect" ... "Start" (when complete...click
"Finish" )
17) The final step is to invoke the 8282 function and make sure the numbers below the CAS ident column reads 10 , 11, 20 and 21 for both DN and BEV. The Loader program in popular use here has a bug which does not load the correct prefix to the key. Version 2.3 loader
is being worked on to fix this and should be available shortly.
GOOD JOB...You are done. If your receiver is not hooked up to TV and dish...hook it up. Go watch TV!
Some advantages of this method are:
Ease...Speed...Accuracy versus remote entry!!!
NOTE: After you use this procedure a couple of times you should be able to do it in about three minutes...GOOD LUCK!
Easy Way To Input Keys Without The Remote...No need to enter 8282!
1) Connect receiver to computer
2) Open Cyber key grabber tool and retrieve the current working keys
You need only do steps 3-5 one time! Use the same downloaded file each time.
3) Open the Coolsat Loader and click on the "Keys" tab
4) Click on "ToComputer"
5) Click on "Browse" and specify the location you want to store
the "keys file" you download from receiver
6) Click on "Auto Detect" ...You will see the version of bin on the
receiver
7) Click "Exit"
8) Click "Connect" then "Start" (keys should download from
receiver in about 5 seconds)
9) Click "Finish"
10) Right click your mouse on the keys file you down loaded from your
receiver and click on "Edit" in the popup.
A notepad will open showing the keys in your recei
ver
Copy Keys from Cyber tool
11) For BEV...high light and copy the first eight key pairs from
"IDEA AUX 0" and paste them over the existing keys
at "10" under "Slot 2" in the keys file you got from receiver
12) Do the same for the second eight key pairs from "IDEA AUX 0"
but paste them over the existing keys at "11"
13) Use same procedures in steps 11) and 12) for "IDEA AUX 1"
but replace the keys at "20" and "21" in the keys file you
downloaded from receiver
14) Save keys file
Loading Keys to Computer
15) On CoolSat loader click on "ToReceiver" ... "Auto Detect" ...
"Exit"
16) Click "Connect" ... "Start" (when complete...click
"Finish" )
17) The final step is to invoke the 8282 function and make sure the numbers below the CAS ident column reads 10 , 11, 20 and 21 for both DN and BEV. The Loader program in popular use here has a bug which does not load the correct prefix to the key. Version 2.3 loader
is being worked on to fix this and should be available shortly.
GOOD JOB...You are done. If your receiver is not hooked up to TV and dish...hook it up. Go watch TV!
Some advantages of this method are:
Ease...Speed...Accuracy versus remote entry!!!
NOTE: After you use this procedure a couple of times you should be able to do it in about three minutes...GOOD LUCK!