PDA

View Full Version : solaris troubles

dodgegriff
05-30-2009, 06:25 PM
Hi. I picked a solaris yesterday and today i tried setting it up but i am having issues. I followed the step by step instructions but its not working. It is wired direct into my D-link DIR-615 wireless N router. It came with the current boot file and i uploaded the the 150.3v software file. Scanned B3V 91.0w, and all im getting is a blue screen saying service not available.
i-ON n-ON p-ON Emul-OFF Suns disconnected. Help please.
Ledge
05-30-2009, 08:07 PM
How many channels did you receive when you scanned?
Only about half the channels work. That is the message you get on the non-working channels.................
dodgegriff
05-30-2009, 08:09 PM
440+ channels. havent found one that works yet
Ledge
05-30-2009, 08:11 PM
Sounds like your scan went right...........
Try rebooting router and modem.......
If that don't work, reboot everything........
dodgegriff
05-30-2009, 08:17 PM
i have rebooted everything. still no channels
Ledge
05-30-2009, 08:20 PM
In "Network Information", is it set to "DHCP"?
Is the Solaris picking up your IP?
dodgegriff
05-30-2009, 08:31 PM
yep still on dhcp. ip address 192.168.000.198
Ledge
05-30-2009, 08:43 PM
Hmmmm........
You could try setting it to "Static" and change the last digit or change the sixth from the last digit.
dodgegriff
05-30-2009, 08:50 PM
tried and nothing.
Ledge
05-30-2009, 08:52 PM
Also, that modem is not on the confirmed working list:

http://www.dssgeeks.com/forums/nfusion-list-tested-t50891/index.html

Are you using a modem too?
Try connecting to the ethernet jack?
dodgegriff
05-30-2009, 08:59 PM
ok. i will try bypassing the router and go right into the modem.
dodgegriff
05-30-2009, 09:07 PM
hooked directly into modem (motorola from shaw cable) rebooted and nothin. hooked back up to router rebooted and nothing
Ledge
05-30-2009, 09:19 PM
You need to go into your "internet" menu and turn "Proxy Connection" to "Off"..................
The red light should start appearing on functioning channels................
dodgegriff
05-30-2009, 09:25 PM
turned proxy off. no red light

should i try a factory default and start from scratch with the boot file?
Ledge
05-30-2009, 09:30 PM
It wouldn't hurt.........
Try channel 1215...
Are any info channels working?

You did change back to DHCP, right?
dodgegriff
05-31-2009, 10:35 AM
did a factory default. unzipped files. reinstalled every file. rescanned and works fine now
Ledge
05-31-2009, 02:55 PM
Whoo Hoo.......................:coolup:
Nice..............:cool:.
rosadorod
06-02-2009, 09:46 AM
Hi. I picked a solaris yesterday and today i tried setting it up but i am having issues. I followed the step by step instructions but its not working. It is wired direct into my D-link DIR-615 wireless N router. It came with the current boot file and i uploaded the the 150.3v software file. Scanned B3V 91.0w, and all im getting is a blue screen saying service not available.
i-ON n-ON p-ON Emul-OFF Suns disconnected. Help please.

turn off the proxy connection and reboot.